Installation Instructions, Unpack Range

INSTALLATION INSTRUCTIONS

Unpack Range

WARNING

Excessive Weight Hazard

Use two or more people to move and install range. Failure to do so can result in back or other injury.

1.Remove shipping materials, tape and protective film from the range. Keep cardboard bottom under range. Remove oven racks and parts package from inside oven.

2.To place range on its back, take 4 cardboard corners from the carton. Stack one cardboard corner on top of another. Repeat with the other 2 corners. Place them lengthwise on the floor behind the range to support the range when it is laid on its back. Using 2 or more people, firmly grasp the range and gently lay it on its back on the cardboard corners.

3.Pull cardboard bottom firmly to remove.

Adjust Leveling Legs

1.If range height adjustment is necessary, use a wrench or pliers to loosen the 4 leveling legs.

This may be done with the range on its back or with the range supported on 2 legs after the range has been placed back to a standing position.

NOTE: To place range back up into a standing position, put a sheet of cardboard or hardboard in front of range. Using 2 or more people, stand range back up onto the cardboard or hardboard.

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

2.Adjust the leveling legs to the correct height. Leveling legs can be loosened to add up to a maximum of 1" (2.5 cm). A minimum of ³⁄₁₆" (5 mm) is needed to engage the anti-tip bracket.

NOTE: If height adjustment is made when range is standing, tilt the range back to adjust the front legs, then tilt forward to adjust the rear legs.

3.When the range is at the correct height, check that there is adequate clearance under the range for the anti-tip bracket. Before sliding range into its final position, check that the anti- tip bracket will slide under the range and onto the rear leveling leg prior to anti-tip bracket installation.

Install Anti-Tip Bracket

Contact a qualified floor covering installer for the best procedure for drilling mounting holes through your type of floor covering.

Before moving range, slide range onto shipping base, cardboard or hardboard.

1.Remove template from the anti-tip bracket kit (found inside the oven cavity) or from the back of this manual.

2.Place template on the floor in cabinet opening so that the left edge is against cabinet and top edge is against rear wall, molding or cabinet.

3.Tape template into place.

4.If countertop is not flush with cabinet opening edge, align template with overhang.

If cabinet opening is wider than that specified in the “Location Requirements” section, adjust template so range will be centered in cabinet opening.

5.To mount anti-tip bracket to wood floor, drill two ¹⁄₈" (3.2 mm) holes at the positions marked on the bracket template. Remove template from floor.

To mount anti-tip bracket to concrete or ceramic floor, use a ³⁄₁₆" (4.8 mm) masonry drill bit to drill 2 holes at the positions marked on the bracket template. Remove template from floor.

6.Tap plastic anchors into holes with a hammer.

9762035A specifications

The Whirlpool 9762035A is a cutting-edge appliance designed to enhance your laundry experience. As a washer and dryer combo, this model packs a variety of features and technologies that underscore Whirlpool’s reputation for innovation and efficiency. Its modern design not only adds a sleek aesthetic to any laundry room but also maximizes functionality for busy households.

One of the standout characteristics of the Whirlpool 9762035A is its capacity. With generous interior space, it offers ample room for washing and drying larger loads, making it an ideal choice for families or individuals with active lifestyles. The combo unit also consolidates space, eliminating the need for separate machines and allowing for greater flexibility in smaller homes or apartments.

This model is equipped with several advanced washing technologies that ensure clothes are treated with care. The Adaptive Wash Technology senses the needs of each load, adjusting the wash action and spin speed for optimal cleaning, while its Smart Load Sensing capability measures the size of the load and adapts water levels accordingly, promoting water conservation.

Drying is made efficient with the unit’s EcoBoost option. This feature utilizes lower temperatures and extended drying times, significantly reducing energy usage while still delivering fresh, dry laundry. The dryer also offers a variety of timed dry cycles, allowing users to customize drying sessions based on their schedules and preferences.

Another highlight of the Whirlpool 9762035A is its user-friendly interface. The intuitive control panel features clear, straightforward settings, making it simple to select the desired wash and dry cycles. Additionally, its Quiet Wash system minimizes noise, allowing you to operate the machine without disturbing the household.

In terms of convenience, the appliance includes a delay start option, enabling you to schedule loads to run at a more convenient time. The stainless steel drum is durable and resistant to chipping, ensuring longevity while preventing rust and stains.

Overall, the Whirlpool 9762035A combines innovative technology with practicality, solidifying its place as a highly sought-after appliance for modern living. With its impressive features and user-centric design, it stands out as a top choice for those seeking efficiency, performance, and convenience in their laundry routine.