Whirlpool 98015195 installation instructions Brackets not shown Manifold

Page 9

10.Remove control knobs. Reinstall the control panel. Securely tighten the 4 screws. Reinstall the control knobs.

IMPORTANT: If not done in Step 8, check the “LO” flame adjustment. See “Check operation” section, Step 19, Page 7.

L.P. gas conversion

1.Check that the manual shutoff valve in the gas supply line has been turned off.

2.Open broiler drawer and remove broiler pan. The pressure regulator is located in the back right hand corner of the broiler compartment.

viewed from inside broiler compartment

Do not remove the pressure regulator.

3.Pressure regulator: Remove the cap from the pressure regulator. Turn the cap over so that LP is visible. Replace the cap.

4.Remove burner grates, burner caps, burners and screws. Lift cooktop.

NOTE: There is no cooktop support rod.

burner cap

burner

screw

5.Cooktop burners:

a. Check that all control knobs are in the OFF position and remove the knobs.

b. Remove the control panel. (See Step 17a, Page 7.)

c. Lift front of bracket and push tube and bracket assembly back off orifice.

burner bracket tube

orifice

d. Locate L.P. gas orifice spuds for top burners in literature package included with the range. Three L.P. gas spuds are stamped “65” and one “62”. Remove Natural gas orifice spuds using a 3/8" combination wrench. Install L.P. gas orifice spuds in locations shown to replace the Natural gas orifice spuds.

NOTE: Depending on model, the range cooktop may be equipped with 4 standard burners or 3 standard burners and 1 power burner. Spud size/location remain the same.

Place Natural gas orifice spuds in plastic parts bag for future use and keep with literature package.

Reinstall burner tube and bracket assemblies.

 

 

Remove and replace

orifice spuds

orifice spuds.

 

 

 

notches

 

NAT

L.P.

 

 

NOTE: Burner tube and gas

 

brackets not shown.

manifold

“65”

“65”

“62”

“65”

L.R.

L.F.

R.R.

R.F.

e. Lower cooktop. Reinstall screws to secure burner tubes to cooktop. Reinstall burners, burner caps and burner grates.

Do not reinstall control panel or knobs. They will be reinstalled in Step 10.

6.Oven burner:

a. Open oven door and remove oven racks, oven tray, flame spreader and set aside. Lift oven burner. The orifice spud is behind the oven burner air shutter.

b. Locate L.P. gas orifice spud stamped “56” in literature package supplied with range.

c. Use a 3/8" combination wrench and remove the natural gas orifice spud. Install the number “56” L.P. gas spud.

Place natural gas oven burner spud in plastic parts bag along with natural gas cooktop burner spuds for future use and keep with literature package.

d. Reinstall the oven burner.

oven burner orifice behind air shutter

L.P. oven orifice spud stamped with “56”

7.Turn manual shutoff valve in gas supply line on. If “Gas and electrical connection” Steps 10–16 on Page 6 were not completed, complete them now.

8.Install control knobs. Check for proper flame. The cooktop burner flames should have a small inner cone with a very distinct blue flame 1/4" (6.4 mm) to 1/2" (1.3 cm) long. The outer cone is not as distinct as the inner cone. The oven burner flame should be 1/2" (1.3 cm) long with a bluish-green inner cone and dark blue outer mantle. L.P. gas flames have a slightly yellow tip. If the flames are noisy or blowing, they are getting too much air. If the flames are soft and lazy, they are not getting enough air. If burners need adjusting, see “Check operation” section, Steps 17-22, Page 7.

9.Close the broiler door. Turn oven control knob to “OFF”.

10.Remove control knobs. Reinstall the control panel. Securely tighten the 4 screws. Reinstall the control knobs.

IMPORTANT: If not done in Step 8, check the “LO” flame adjustment. See “Check operation” section, Step 19, Page 7.

9

Image 9
Contents Installation Instructions Tools and materials needed Before you startCutout dimensions/requirements Parts supplied for installationProduct dimensions Anti-tip bracketGas supply requirements Electrical requirementsNatural GAS Now start…Gas and electrical connection Check operationCheck operation of oven/broil burner Natural gas conversion Gas conversionBrackets not shown Manifold Moving the range If you need service For cleaning MaintenanceIf range does not operate If you need assistanceBenton Harbor, Michigan Whirlpool Corporation

98015195 specifications

The Whirlpool 98015195 is a contemporary appliance designed to enhance the kitchen experience through its innovative features and advanced technologies. This versatile model serves various functions, making it an invaluable addition to any modern household.

One of the standout features of the Whirlpool 98015195 is its spacious design, which allows users to prepare larger meals with ease. The appliance boasts a generous capacity, enabling simultaneous cooking or reheating of multiple dishes. This feature is particularly advantageous for families or those who enjoy entertaining guests, as it reduces cooking time significantly.

In terms of technologies, the Whirlpool 98015195 incorporates advanced cooking modes that ensure precision and consistency. The appliance includes settings for baking, roasting, and broiling, allowing users to achieve optimal results regardless of the cooking task. The built-in sensor cooking technology intelligently adjusts cooking times and power levels based on the food’s moisture content and temperature, ensuring perfectly cooked meals every time.

Another remarkable characteristic of the Whirlpool 98015195 is its user-friendly interface. The appliance is equipped with a digital control panel that offers an intuitive layout, making it easy for users to navigate through various functions and settings. Additionally, the appliance features a bright LED display that provides clear visibility, allowing users to monitor cooking progress at a glance.

The design of the Whirlpool 98015195 also emphasizes energy efficiency. It operates with lower energy consumption compared to traditional cooking methods, promoting environmentally friendly practices while keeping utility costs down. This focus on sustainability aligns with the growing trend of eco-conscious living.

Easy maintenance is another boon of the Whirlpool 98015195. The appliance features a non-stick interior, which simplifies the cleaning process and minimizes the effort required to maintain its pristine condition. The removable components are dishwasher safe, adding to the convenience for busy families or individuals.

In summary, the Whirlpool 98015195 is a state-of-the-art kitchen appliance that combines functionality, efficiency, and user-friendly design. With its spacious capacity, advanced cooking technologies, and commitment to energy efficiency, it is well-suited for a variety of cooking needs in today’s fast-paced lifestyle. Whether you are a culinary enthusiast or simply looking for an efficient way to prepare meals, the Whirlpool 98015195 is a worthy investment for any kitchen.