Whirlpool 9757454 manual Electronic Oven Control, Start, Off/Cancel, Tones, Timer

ELECTRONIC OVEN CONTROL

ABC D

E	F	G	H	I	J	K
A. Oven Display	E. Oven Settings				I. Hour and Minute
B. Timer Functions	F. Temperature Adjustment				J. Start and Control Lock
C. Clock	G. Auto Clean				K. Off/Cancel
D. Oven Light	H. Timed Cooking
Display					Clock

When power is first supplied to the appliance, everything on the display will light up for 1 to 2 seconds, then the time of day and “PF” will appear. Press OFF/CANCEL to clear “PF” from the display.

If “PF” appears at any other time, a power failure has occurred. Press OFF/CANCEL and reset the clock if needed.

When the oven is in use, the display shows preheat time and the temperature and oven setting.

When the oven is not in use, the display shows the time of day.

When using the TIMER, for settings of 1 to 59 minutes, the display will count down in seconds. For settings 1 hour or over, the display will count down hours and minutes.

When using COOK TIME, the display will show hours and minutes. When using STOP TIME, the display will show minutes and seconds.

Start

After setting a function, you must press the START button to start the function. If you do not press the START button within

5 seconds, “START?” will be displayed as a reminder.

Off/Cancel

The OFF/CANCEL button stops any function except the Clock, Timer and Control Lock. When you press the OFF/CANCEL button, the display will show the time of day, or the time remaining if the TIMER is being used.

On some models, if you do not want the clock time to be displayed, press and hold the CLOCK pad (button) for 5 seconds. When the clock is not displayed, you can see the time for

5 seconds by pressing the CLOCK pad (button).

To Set:

Before setting, make sure the oven, TIMER and COOK TIME are off.

1.Press CLOCK.

2.Press the HOUR “up” or “down” arrow pads (buttons) to set the time of day.

3.Press CLOCK or START.

Tones

Tones are audible signals which indicate that a function has been entered correctly, or when a cycle has ended.

To shut off all tones except the end-of-timer and error tones:

1.Press and hold the STOP TIME button for 5 seconds.

2.A short tone will sound when the tones have been changed. To turn tones back on, repeat Step 1.

3.“Off” will be displayed for 3 seconds when the tones have been turned off, and “ON” will be displayed for 3 seconds when the tones have been turned back on.

Timer

The Timer can be set in hours or minutes up to 12 hours and 59 minutes, and counts down the set time.

NOTE: The Timer does not start or stop the oven.

To Set:

1.Press TIMER SET.

If no action is taken after 5 minutes, the display will return to the time of day mode.

2.Press the HOUR “up” or “down” arrow pads (buttons) to set the length of time.

9