Frequently Asked Questions
Should I use a Balanced or Unbalanced connection?
If your amplifier has a true balanced input, we recommend you use the balanced analog output from your Wadia S7i Integrated CD Player / Decoding Computer. All things being equal, properly implemented balanced (also called differential) circuitry sounds better than unbalanced circuitry.The Wadia S7i Integrated CD Player / Decoding Computer is a true balanced design. It generates the inverted signal in the digital domain and all subsequent processing is done in balanced mode. Your Wadia S7i Integrated CD Player / Decoding Computer is designed to maintain many of the advantages of true balanced design when using the unbalancedoutputs. In addition, the Wadia S7i Integrated CD Player / Decoding Computer output stage is capable of driving both types of outputs simultaneously.
Why should I bypass the Preamplifier?
A preamplifier is unnecessary when using your Wadia S7i Integrated CD Player / Decoding Computer. The Wadia S7i Integrated CD Player / Decoding Computer provides all the necessary control functions of a preamp while the signal is still in the digital domain. This avoids the sonic degradation caused by analog circuitry, switches, and wire. The Wadia S7i Integrated CD Player / Decoding Computer output stage can drive any power amplifier and any interconnects, even at very long lengths.
Does the Wadia Volume Control compromise resolution?
The Wadia S7i Integrated CD Player / Decoding Computer uses the latest generation of Wadia’s proprietary digital volume control. The volume level can be varied in the digital domain by means of mathematical manipulation of the signal, eliminating the distortion and noise that are inevitable with even the best analog volume controls. While conventional thinking indicates that reducing the volume digitally can sacrifice low level resolution, Wadia has created an innovative solution. Wadia’spatented digital filtering algorithm produces a 24 bit output rather than the 16 bits stored on the CD. This
Can I bypass the Wadia Volume Control?
Because the Digital Volume control does not include any analog circuitry, there is none to be bypassed. Even the mathematical program step that performs the Digital Volume Control calculation is an integral part of the Wadia DigiMaster filter algorithm and therefore cannot be bypassed. If you do not need the Wadia Volume Control, set it to its maximum level of 100 on the display.
What about Analog Sources?
In order to fully realize the potential of this type of system, Wadia has a range of
Should I leave the Wadia S7i Integrated CD Player / Decoding Computer with the power on?
The Wadia S7i Integrated CD Player / Decoding Computer is designed to be left with the power on with no harm or wear to the unit. All motors and laser circuitry turn off when the unit stops playing. If desired, the front dis- play can be turned off (see Turning off the Display under Remote Operation). Leaving the power on allows the circuitry to remain in thermally stable, which provides better performance and longer life. Careful listeners will notice that the sound of the Wadia S7i Integrated CD Player / Decoding Computer will improve steadily after the unit is powered up. A new unit will undergo more dramatic changes when power is applied for the first time. If you turn off your Wadia S7i Integrated CD Player / Decoding Computer for more than an hour, you will find that the unit will undergo similar, but less dramatic improvement once power is reapplied.
7