Wadia Digital 850 manual Installation and SET-UP, AC outlet if you find shipping damage

Page 6

WADIA 850

COMPACT DISC PLAYER

INSTALLATION AND SET-UP

Unpacking Use care in unpacking your Wadia 850 Compact Disc Player. Inspect it for any shipping damage and call your dealer immediately if any is found.

Q Do not plug your Wadia 850 Compact Disc Player into an

AC outlet if you find shipping damage.

We advise saving all packing materials so that the unit can be easily and safely shipped if the need arises.

Accessories Provided with the Wadia 850 are the following accessories:

AC power cord

Four spiked feet with threaded studs

Four steel coasters

Remote Control

Three type MA batteries

Installing the With the unit still positioned on its side, screw one of the spiked feet into Spiked Feet the bottom of each corner post.

Position the Wadia 850 where you would like it to reside in your system. We recommend choosing a solid, non-resonant, level, surface for best performance. If this surface is susceptible to damage, place one of the steel coasters under each spiked foot.

Q Do not tip the unit onto the back panel.

This can damage input and/or output connectors.

.

l&J

4

Image 6
Contents A Y E R Page ?i!!F Table of Contents Wadia PreliminariesInstallation and SET-UP AC outlet if you find shipping damageConnecting Wadia To Your System Check Voltage Here Optimizing Output Level Should I leave the Wadia 850 with the power on? Why should I bypass the Preamplifier?Can I bypass the Wadia Digital Volume Control? Should I use a Balanced or Unbalanced connection?To the on position Located on the front panel of the unitNumeric display Indicates transport operationsRemote Control Operation IndexMute Modes DSP-Software Mute Output-Relay Mute Wadia Wadia Troubleshooting Lock-up AppendicesEnvironmental Care Do not attempt to repair or modify your Wadia 850 CD Player Specifications WarrantyPage Wadia Digital Corporation