Optimizing Output Level | Wadia Digital 850 specs

WADIA 850

COMPACT DISC PLAYER

Optimizing the

Output Level

Optional Digital Inputs/Outputs

Connecting Other

Digital Components

to your Wadia 850

Choosing a

Digital Cable

Best performance is obtained when operating the Wadia Digital Volume Control in the top half of its range. If needed, the maximum output level of your Wadia 850 can be adjusted to match the overall sensitivity of your system so that the critical listening will take place with the volume control operating in the top half of its range.

The maximum output level of the Wadia 850 Compact Disc Player is adjust- able by means of a set of internal switches. The Wadia 850 is factory set at 4-2 volts to accommodate the most common range of system sensitivity. If you find that your typical volume level during critical listening is below 50 on the volume display, then it may be advantageous to use a different setting.

The output level is not user adjustable. If you would like to change the output level, consult your dealer.

Your Wadia 850 Compact Disc Player can be retrofitted to include digital inputs and/or outputs. Consult your dealer for information on this option.

If your Wadia 850 is equipped with the optional digital inputs, the configuration is as follows:

Input 1: Glass-fiber optical

Input 2: Coaxial with BNC connector

Input 3: Coaxial with BNC connector

Input 4: Plastic-optical TOSLINK

The Wadia 850 will automatically adjust to the sampling rate of any of the standard digital audio formats.

If your Wadia 850 is equipped with the optional digital outputs, the configuration is as follows:

Output 1: Glass-fiber optical

Output 2: Coaxial with BNC connector

The digital output signal is active at all times when a CD is playing in the transport.

While the Wadia 850 supports several transmission formats for digital audio, we recommend using a high quality glass-fiber cable such as the one available from Wadia. Wadia Digital was the first company to use glass fiber-optic data transmission in digital audio. We have continually improved this format and believe that it offers the best, most consistent performance of all the available options.

Based on our experience, here is a list of digital interface methods in descending order of performance:

1.Glass optical

(as implemented by Wadia, with high quality glass optical cable)

2.Coaxial cable using BNC connector

3.Coaxial cable using RCA connector

4.TOSLINK plastic-optical cable

The quality of any of these transmission methods depends on the quality of the cable and the sophistication of the transmitter and receiver.

If you are using a coaxial cable we recommend that you have the cable terminated with a BNC connector. This will provide higher performance than an RCA connector. If you purchased the optional digital inputs or outputs, an RCA/BNC adaptor is provided. The adaptor can be used for experimentation between different types of coaxial cables.

Again, we highly recommend that you take advantage of your dealer’s experience and, most importantly, trust your ears.