Operation.
•Select the fan speed you require.
•Push button 3 for high extraction level, 2 for medium and 1 for low. The fan in- dicator light will glow and the fan will operate at the selected setting.
•To switch off the fan, push the fan off button marked 0.
•If required, you may illuminate the cooking area by switching the hood lights on.
•Leave the hood running for a short pe- riod after the cooking has been com- pleted to clear any smoke and odours.
Fan off button
1 | 2 | 3 | 0 |
Lights | Fan speed |
| Fan |
on/ off |
| indicator | |
|
|
light
Replacing the light bulbs.
•Switch off the electricity supply.
•If the bulb has recently failed, it might still be very hot. Allow the glass cover to cool before attempting to re- move the bulb.
•Hold the glass cover and unclip the re- taining ring by inserting a finger nail along the outer edge and pulling down.
•Be careful not to let the glass cover fall.
•Replace the light bulb with a commer- cially available OSRAM 12V 20W (64425) or equivalent bulb.
•Take care not to handle the replace- ment bulb with bare fingers as tran- fered skin oil may shorten the life ex- pectancy of the halogen bulb.
•Fit the glass cover in the retaining ring, align the 3 clips to the slots and clip back into place.
•Switch on the electricity supply.
Housing
Glass cover
Light bulb
Retaining ring
Page 6