Defy Appliances DCH299, DCH304 Description, Before use, Safety advice, Electrical connection

Page 4
Page 4

Description

The extractor hood fan extracts the kitchen vapours and passes them through the grease filter.

The grease filter absorbs the solid particles in the cooking vapours, keeping the kitchen almost free of grease.

Before use

Before using your new extractor hood for the first time, please read this manual carefully. It contains important information concerning your personal safety as well as on the use and care of the extractor hood.

Remove all packaging (except the protective film on the two chimney sections) and dispose of it in an environmentally friendly manner.

If the extractor hood is damaged in any way, do not use it. Report the damage to your dealer, who will take the necessary corrective action. (Refer to Owner’s responsibility on page 11 of this manual).

Safety advice

This extractor hood complies with all relevant safety regulations.

Never operate the extractor hood without a grease filter.

Never leave cooking fat or oil unattended. Overheated fat or oil can easily catch fire.

Do not flambé food directly under the extractor hood. The flames pose the risk of the grease filter catching fire. (see page 10 Maintenance and cleaning).

Restrictions apply to the use of the extractor hood over a solid fuel or gas stove. (See Preparing for installation on page 5).

Switch off the power at the mains in the event of a fault or when cleaning the

extractor hood.

Do not touch any part of the light fittings or adjacent areas during or straight after prolonged use as they get very hot and could cause severe burns.

In certain circumstances electrical appliances may be a hazard.

Do not check the status of the filters while the extractor hood is operating.

Avoid leaving exposed flames unattended and always ensure that the burners are covered as open flames are damaging for the filters and a fire hazard.

Constantly check food frying to avoid overheated oil becoming a fire hazard.

There must be adequate ventilation of the room when the extractor hood is used at the same time as appliances burning gas or other fuels.

There is a risk of fire if cleaning is not carried out in accordance with the instructions.

Electrical connection

The extractor hood uses a 220- 230V~ /50Hz power supply.

If the mains power cord is damaged, it must be replaced by a qualified electrician.

The power cord is located in the chimney area. Should you require an installation with no visible wiring, a 15 amp earthed plug socket should be accessible either in the ceiling above the extractor hood or on the wall behind the chimney area. (A qualified electrician should provide this facility).

The extractor hood must be earthed. The manufacturer and the seller do not accept responsibility for any damage due to incorrect electrical connection.

This extractor hood may not be used with a battery inverter power supply.

Image 4
Contents Premium Extractor Hood Introduction IndexImportant safety instructions General safetySafety for children Safety when working with electricitySafety advice DescriptionBefore use Electrical connectionPreparing for installation Tools required for installationRecirculating filtered air Venting air to the outsideInstallation Installation sequenceMounting Diagram Before and after use Optional Carbon pad filters Grease filtersOperation Replacing the light bulbsMaintenance and cleaning Cleaning materials Do useCleaning procedure Do not useService centres Problem checkOwner’s responsibility Warranty

DCH303, DCH299, DCH304 specifications

Defy Appliances has long been recognized for its commitment to quality and innovation in the home appliance industry. Among their impressive lineup, the Defy DCH303, DCH304, and DCH299 stand out as exemplary models, each designed to enhance modern living through advanced technologies and user-friendly features.

The Defy DCH303 is a stellar choice for those looking for efficiency in drying clothes. This model boasts a generous capacity, making it ideal for families or those with larger laundry needs. One of its standout features is the moisture sensor technology, which automatically detects when clothes are sufficiently dry. This prevents overdrying, saving energy and prolonging the life of garments. Additionally, the DCH303 includes various drying programs that cater to different fabric types, ensuring optimal care for each piece of clothing.

Moving to the DCH304, this model combines performance with practicality. It features a sleek design that fits seamlessly into any laundry space. The DCH304 is equipped with inverter technology, which operates at lower speeds to reduce energy consumption while maintaining powerful drying capabilities. This not only contributes to lower utility bills but also minimizes noise during operation, creating a quieter home environment. The intuitive control panel on the DCH304 allows users to easily select from multiple drying cycles and customize settings according to their preferences.

Lastly, the Defy DCH299 stands out for its compact size and efficiency, making it perfect for urban dwellers with limited space. Despite its smaller footprint, it is packed with features that optimize performance. The DCH299 includes a digital display that provides real-time information on drying progress. Its durable build ensures longevity, while the multiple safety features, including overheat protection, offer peace of mind during use.

All three models share a commitment to energy efficiency, emphasizing Defy's dedication to environmentally friendly choices. With their robust features, advanced technologies, and user-centric designs, the Defy DCH303, DCH304, and DCH299 not only cater to diverse laundry needs but also enhance the overall laundry experience, making them excellent choices for any household.