Defy Appliances DCH304, DCH299, DCH303 user manual Installation sequence

Page 6

Installation

Installation sequence;

1.Extractor unit / chimney brackets.

2.Top chimney duct.

3.Bottom chimney duct.

•Carefully remove the extractor hood and the components from the packaging.

•Carefully remove the protective film.

•Remove the grease filters (see page 8).

•Draw a fine vertical line on the wall from the rear-centre of the hob to the ceiling.

•Draw another line, horizontal this time, where the bottom edge of the hood should be.

•(A minimum clearance height of 650 mm is required when installed above a built in electric hob or 700 mm when installed above a built in gas hob).

•For mounting the chimney bracket, drill 2 holes, 5 mm diameter and 45 mm deep into the wall.

•For mounting the extractor hood, drill 2 holes, 8 mm in diameter and 60 mm deep as indicated on the mounting diagram.

•Push the 5 mm wall plugs through the holes in the chimney mounting brackets. Insert the plugs into the drilled holes together with the chimney mounting bracket and fasten securely.

•Push the 8 mm wall plugs into the 8 mm holes ensuring that they are flush with the wall.

•Partially screw two 6 mm screws into the two top wall plugs leaving them to protrude about 10 mm.

•Lift and hook the extractor hood over and onto the two protruding screws through the key-hole slots provided at the top of the extractor hood frame.

•Place slotted washers between the extractor hood frame and the protruding screw heads.

•Before fitting the chimneys, connect up the outlet ducting (if required) and insert the fitted plug into the wall socket.

•Remove the protective film from the chimney ducting taking care not to damage the polished stainless steel surface.

•Fit the upper chimney duct section (the one with louvre outlets) to the ceiling mounting bracket using the screws supplied.

•The lower duct fits between and over the extractor hood motor assembly and the upper duct. Take care not to scratch or damage the hood and upper duct surfaces.

•Loosely attach the lower duct bottom edge to the hood by four self tapping screws through four holes on the inside of the extractor hood.

•Fit the lower duct to the lower chimney wall mounting bracket and tighten the four self tapping screws on the inside of the extractor hood.

10mm

Page 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Premium Extractor Hood Introduction IndexSafety for children Important safety instructionsGeneral safety Safety when working with electricityBefore use Safety adviceDescription Electrical connectionRecirculating filtered air Preparing for installationTools required for installation Venting air to the outsideInstallation Installation sequenceMounting Diagram Before and after use Optional Carbon pad filters Grease filtersOperation Replacing the light bulbsCleaning procedure Maintenance and cleaningCleaning materials Do use Do not useProblem check Service centresOwner’s responsibility Warranty

DCH303, DCH299, DCH304 specifications

Defy Appliances has long been recognized for its commitment to quality and innovation in the home appliance industry. Among their impressive lineup, the Defy DCH303, DCH304, and DCH299 stand out as exemplary models, each designed to enhance modern living through advanced technologies and user-friendly features.

The Defy DCH303 is a stellar choice for those looking for efficiency in drying clothes. This model boasts a generous capacity, making it ideal for families or those with larger laundry needs. One of its standout features is the moisture sensor technology, which automatically detects when clothes are sufficiently dry. This prevents overdrying, saving energy and prolonging the life of garments. Additionally, the DCH303 includes various drying programs that cater to different fabric types, ensuring optimal care for each piece of clothing.

Moving to the DCH304, this model combines performance with practicality. It features a sleek design that fits seamlessly into any laundry space. The DCH304 is equipped with inverter technology, which operates at lower speeds to reduce energy consumption while maintaining powerful drying capabilities. This not only contributes to lower utility bills but also minimizes noise during operation, creating a quieter home environment. The intuitive control panel on the DCH304 allows users to easily select from multiple drying cycles and customize settings according to their preferences.

Lastly, the Defy DCH299 stands out for its compact size and efficiency, making it perfect for urban dwellers with limited space. Despite its smaller footprint, it is packed with features that optimize performance. The DCH299 includes a digital display that provides real-time information on drying progress. Its durable build ensures longevity, while the multiple safety features, including overheat protection, offer peace of mind during use.

All three models share a commitment to energy efficiency, emphasizing Defy's dedication to environmentally friendly choices. With their robust features, advanced technologies, and user-centric designs, the Defy DCH303, DCH304, and DCH299 not only cater to diverse laundry needs but also enhance the overall laundry experience, making them excellent choices for any household.
Top Page Image Contents