![](/images/new-backgrounds/1106948/10694819x1.webp)
Hardware Setup
Single Station Installation (continued)
6.Optional: Connect a second Cat5e cable from the network into the KVM switch’s backup (secondary) network port (LAN 2).
7.Optional
8.Use the included grounding wire to ground the unit. Connect one end of the wire to the grounding terminal, and the other end of the wire to a suitable grounded object.
9.Plug the included power cord into the KVM switch’s Power Socket, and then into a Tripp Lite Surge Suppressor, Uninterruptible Power Supply (UPS) or PDU.
10.Turn on the power to the KVM switch. Once it is powered up, turn on the power to the connected computers.
2
4
6
9
3
8
52
7
3
Two Stage Installations
Up to 32 additional KVM switches can be cascaded from the KVM ports of the B064- Series KVM Switch in order to expand the number of connected computers/servers. In a cascaded installation, the top
To set up a two stage installation, refer to the instructions below:
1.Make sure that power to all the devices you will be connecting, including all
2.Use Cat5e patch cable to connect any available KVM Port on the First Stage unit (the
3.Plug the
Note: The distance between the Second Stage unit and the First Stage Unit must not exceed 130 ft.
4.Use the appropriate KVM Cable Kits (See the Second Stage KVMs owner’s manual), to connect any available KVM port on the Second Stage unit to the Keyboard, Video and Mouse ports of the computer/server you are installing.
10