Tripp Lite B064-032-02-IP owner manual Super Administrator Setup, First Time Setup, Local Console

Super Administrator Setup

The B064-Series KVM Switches supports three types of users, as shown in the table below:

User Type	Description
Super Administrator	Super Administrators have full access to all Ports and Devices in the KVM installation. They can manage all aspects of the
	installation.
Administrator	Administrators have access to Ports and Devices that are authorized by the Super Administrator. They can manage Users
	and Groups and configure their personal working environment.
User	Users can access Ports and Devices authorized by Super Administrators or Administrators and they can configure their
	personal working environment.

First Time Setup

Once the B064-Series KVM Switch has been installed, the Super Administrator needs to set the unit up for user operation. This involves setting the network parameters and adding users.

Network Setup - IP Address Determination

If you are an administrator logging in for the first time, you need to access the B064-Series KVM Switch in order to give it an IP address that users can connect to. There are four methods to choose from; Local Console, IP Installer, AP Windows Client and Browser.

Local Console

After the local console has been connected and the B064-Series KVM Switch is turned on, a login prompt appears on the console monitor:

Log in using the default Username: administrator and Password: password. For security purposes, it is strongly recommended that you change these to a unique Username and Password. (See Changing the Super Administrator Login, page 14 for details.)

After you successfully log in, the Local Console Main Screen appears:

1.Click the Device Management icon at the top of the screen.

2.On the notebook screen that appears on the right-hand side of the page select the Network tab.

12