Broan WC26I Install Filters, Warranty, NON-DUCTED Hoods only, NON-DUCTED Recirculation Filter

Page 14

INSTALL FILTERS

DUCTED AND NON-DUCTED HOODS

1.To remove the GREASE filter, grip the latch tab and pull it down. This will disengage the filter from the hood. Tilt the filter downward and remove. Fig. 19.

2.To install the GREASE filter, align rear filter tabs with slots in the hood. Pull latch

tab down, push filter into position and release. Make sure the filter is securely engaged after installation. Fig.19.

NOTE: Prior to use, remove protective film from the filter frame.

NON-DUCTED HOODS ONLY

1.To remove the CHARCOAL filter, push in on the front filter latch. Pull the filter down to disengage the rear filter tabs. Fig. 20.

2.To install the CHARCOAL filter, align the rear filter tabs with slots in the hood. Push the filter up into place until the front latch snaps securely into the slot. Make sure the filter is securely engaged after assembly.

3.Install GREASE filter after charcoal filter in installed.

GREASE FILTER

FIG. 19

NON-DUCTED

 

RECIRCULATION FILTER

FIG. 20

WARRANTY

BROAN ONE YEAR LIMITED WARRANTY

Broan warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OR MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

During this one-year period, Broan will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service.

THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES, HALOGEN AND INCANDESCENDT BULBS. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other than by Broan), faulty installation or installation contrary to recommended installation instructions.

The duration of any implied warranty is limited to the one-year period as specified for the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

BROAN’S OBLIGATION TO REPAIR OR REPLACE, AT BROAN’S OPTION, SHALL BE THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUEN- TIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.

To qualify for warranty service, you must (a) notify Broan at the address stated below or telephone: 1-800-637-1453, (b) give the model number and part identification and (c) describe the nature of any defect in the product or part. At the time of requesting warranty service, you must present evidence of the original purchase date.

BEST BY BROAN, P.O. Box 140 Hartford, Wisconsin 53027

- 14 -

Image 14
Contents Model WC26I Read and Save These Instructions Intended for Domestic Cooking only ! WarningPage LED Display OperationControls Heat SentryEration on the appliance Fuse ReplacementHalogen Bulbs Grease Filter MaintenanceHood Cleaning Non-ducted Recirculation FilterPrepare the Hood Ducted Hoods only Install the DuctworkInstall Electrical Ducted and NON-DUCTED HoodsWood Cross Support Install Mounting BracketFraming Behind Support BehindMounting Screws Install Flue Mounting BracketDucted and NON-DUCTED Hoods Flat Head Bracket Screws NON Ducted Hoods onlyFlue Mounting Ducted NON InstallHood Ducted HoodsRooms with 10-FOOT Ceilings LowerBroan ONE Year Limited Warranty Install FiltersWarranty NON-DUCTED Hoods onlySeulement Pour Utilisation Domestique ! Avertissements AvertissementsPage Heat Sentrymc CommandesFonctionnement ’appareil Remplacement FusibleAmpoules Halogenes ’ouverture du fusibleFiltre à charbon EntretienFiltre anti-graisse Nettoyage de votre hottePreparez LA Hotte Uniquement Pour LES Hottes Avec Tuyau D’EVACUATION Installation DU Systeme D’EVACUATIONInstallation Electrique HotteInstallation Etrier D’ASSEMBLAGE Installation Etrier DE Support DU Conduit Decoratif Configuration Avec Tuyau D’EVACUATIONConfiguration Recyclant L’AIR DU ConduitModele Avec Tuyau ’EVACUATION ET InstallationDE LA Hotte Modele RecyclantPièces Avec DES Plafonds DE 10’ Conduit InférieurHottes Avec Tuayu D’EVACUATION ET Hottes Recyclant L’AIR Installer LES FiltresGarantie Hottes Recyclant L’AIR SeulementLEA Y Conserve Estas Instrucciones AdvertenciaAdvertencia La pantalla LED FuncionamientoMandos Atención las lámparas pueden estar calientes Lamparas HalogenasSustitucion Fusible Filtro antigrasa Filtro al carbón configuración sin tuboMantenimiento Limpieza de la campanaPrepare LA Campana DecorativoCON Conducto Y SIN Conducto Instalacion DEL Tubo DE ExtraccionInstalacion Electrica Instalacion Soporte DE Montaje DEL Tubo Configuración CON ConductoTornillos DE Tornillos DE MontajeMontaje Configuración SIN ConductoPreparación DE LA Campana Cabeza Plana DEL TuboCON Conducto Y SIN Instalación DELA Campana Salas CON Techos DE 10 Pies Tubo Decorativo InferiorCampanas CON O SIN Conducto Instalación DE LOS FiltrosGarantia Sólo Para Campanas SIN ConductoService Parts Model WC26IListe Pieces DE Rechange Modele WC26ILista DE Piezas DE Recambio Modelo WC26I04307438/4

WC26I specifications

The Broan WC26I is a high-performance range hood designed to effectively enhance your kitchen's air quality while adding a contemporary touch to your culinary space. This innovative model offers a perfect blend of style, functionality, and advanced technologies, making it a favorite among homeowners and chefs alike.

One of the standout features of the Broan WC26I is its sleek design. It boasts a modern, under-cabinet style that fits seamlessly into various kitchen decors. The range hood is available in different finishes, such as stainless steel, to match your appliances and cabinetry. Its minimalist aesthetic not only elevates the kitchen's visual appeal but also ensures easy integration into any design scheme.

Performance-wise, the Broan WC26I is equipped with a powerful yet quiet motor that delivers exceptional ventilation. With multiple fan speeds, including a robust high setting for those intense cooking sessions, it effectively eliminates smoke, grease, and odors from your kitchen, ensuring a cleaner and more comfortable cooking environment.

The Broan WC26I also incorporates advanced technologies to enhance user experience. It features a convenient, easy-to-use control panel that allows you to adjust the fan speed and lighting with just a touch. The integrated LED lighting not only illuminates your cooking area efficiently but also contributes to energy savings, as LEDs consume less power than traditional bulbs.

Another notable characteristic is the dishwasher-safe grease filters. These filters are designed to capture airborne grease particles, ensuring that your kitchen remains free of unwanted residues. Their washable design simplifies maintenance, making it easy to keep your range hood in optimal condition.

The Broan WC26I operates at low noise levels, allowing for a peaceful cooking environment without the distraction of loud ventilation systems. This feature is particularly appreciated during gatherings or dinner parties when conversations are paramount.

In conclusion, the Broan WC26I range hood stands out for its combination of modern design, powerful performance, user-friendly features, and easy maintenance. Whether you're an avid home cook or someone who enjoys hosting, this range hood is an excellent addition to any kitchen, ensuring a pleasant and efficient cooking experience. With its elegant look and high functionality, the Broan WC26I is a worthy investment for those looking to elevate their kitchen setup.