Broan QTR050 warranty Connect Wiring Install Grille, Service Parts

		MODELS qtr050 • QTR080
		QTRE080 • QTR110 • QTRE110
		Page 
CONNECT WIRING	INSTALL GRILLE
	5.	Finish ceiling.
		Install ceiling material. Cut out around housing.
	6.	Attach grille
		to housing.
		Squeeze grille
		springs and insert
		them into slots on
		each side of hous-
		ing.

7. Push grille

against ceil-

ing. 4. Connect electrical wiring.

Run 120 VAC house wiring to installation location. Use proper UL approved connector to secure house wiring to wiring plate. Connect wires as shown in wiring diagrams.

SERVICE PARTS

			Replacement parts
Key No.	Part No.	Description	can be ordered on our
1	97016466	Housing	website. Please visit us
			at www.broan.com
2	97016449	Duct Connector-4”
3	98010102	Wiring Plate
4	99170245	Screw, #8-18 X .375
5	97016932	Wire Panel/Harness Assembly
6	99020284	Blower Wheel
7	99080560	Motor (qtr050)
	99080568	Motor (QTR080)
	99080582	Motor (QTR110)
	99080580	Motor (QTRE080, QTRE110)
8	99100491	Isolator (4 req’d)
9	97016468	Motor Plate
10	99250959	Washer #8 (4 req’d)
11	99260558	Nut, Hex Lock #8-32 (4 req’d)
*	97016587	Blower Assembly (QTR050)	TAB
*	97016621	Blower Assembly (QTR080)
*	97016739	Blower Assembly (QTR110)
*	97016738	Blower Assembly (QTRE080, QTRE110)
		(includes key nos. 6 thru 11)
12	97016497	Grille Assembly
		(includes key no. 13)
13	99140199	Grille Spring (2 req’d)
14	99111293	Spacer (2 supplied)
15	QTHB1	Hanger Bars
16	99420665	Thumbscrew, #8-18 x .375

Order service parts by “Part No.” - not by “Key No.” * Not shown assembled.

SERVICE NOTE To remove Blower Assembly: Unplug motor (7). Remove

thumbscrew (16) from motor plate (9) flange. Find the single tab on the motor plate (located next to the receptacle). Push up near motor plate tab while pushing out on side of housing. Or insert a straight-blade screwdriver into slot in housing (next to tab) and twist screwdriver.

99043843D