The auxiliary temperature sensor is a thermistor attached to a two conductor cable. Connect one conductor to A5 terminal and the other conductor to a GROUND terminal.
INITIALIZATION OF THE AUXILIARY TEMPERATURE SENSOR.
Press EXC to get the MAIN MENU.
From the MAIN MENU press number 1. STATION SET UP.
From the Station Set Up menu press number 6. ADD OR REMOVE SENSORS. Then press Y, then ENTER.
From the Sensor Type Menu select number 4. Temperature. Then press
ENTER.
From the Temperature Sensors Menu select number 1.
The menu then asks: Enter temperature offset or press Q to quit. Press Q.
From the Sensor Input Channel Menu select number A6. Then press ENTER.
If you intend to add another sensor select A.
If you do not want to add another sensor select Q.
You will be asked if you are sure that you want to erase memory. If you have added or deleted a sensor select Y if not select N and press ENTER.
Installation of Solar Radiation Sensor
Connect the solar radiation sensor to the terminal strip on the back of the control module. This sensor has a two wire cable. Attach the WHITE conductor to the A1 terminal and the BLACK conductor to a GROUND terminal.
INITIALIZATION OF THE SOLAR RADIATION SENSOR
Press EXC to get the MAIN MENU.
From the MAIN MENU press number 1. STATION SETUP.
From the Station Set Up menu press number 6. ADD OR REMOVE SENSORS. Then press Y, then ENTER.
From the Sensor Type menu select number 8. Solar Radiation. Then press ENTER.
From the Solar Radiation menu select number 1. Model
Next enter the calibration factor from the calibration sheet, which was supplied with the sensor.
Then press ENTER.
17
