Broan QT230SS Wiring Connections, Lamp Installing Or Replacement, Filter Installation Replacement

Page 4

WIRING CONNECTIONS

All wiring connections must comply with local codes and the unit must be properly grounded.

1.Make sure box connector is secure.

2.Refer to FIGURE 8. Make wiring connections.

3.Replace electrical box cover and secure with screw.

LAMP INSTALLING

OR REPLACEMENT

1.Depress sides of light diffuser until tabs of diffuser disengage from slots in hood. Remove diffuser.

2.Install (2) 40 watt maximum, Type A-15 appliance bulbs.

3.Replace difuser in hood by depressing sides and engaging tabs in slots in hood.

FILTER INSTALLATION

AND REPLACEMENT

1.For ducted operation, install the aluminum mesh filter. For non- duct operation, install the non-ducted filter (Model BPQTF, sold separately).

2.Refer to FIGURE 9. The filter slides into channels at the back of the hood, on either side of the fan compartment, and snaps under the spring clips near the front of the fan compartment.

MAINTENANCE

FILTERS

IMPORTANT: The aluminum filter should be removed once monthly and washed in hot detergent water. Rinse in clear, warm water and shake off excess moisture before replacing. The filter may also be cleaned in your dishwasher.

IN A NON-DUCTED INSTALLATION: Replace filter every 3-6 months as needed.

CLEANING

The hood should be wiped off occasionally both inside and outside using warm water, mild dish detergent and a soft cloth. Never use scouring powders, steel wool pads or any other abrasive cleaners which will destroy the hood’s finish.

HOOD WIRING

WHT

BLK

GREEN GROUND SCREW

WHT

SUPPLY

 

BLK

WIRING

GREEN

 

OR BARE

 

(GROUND)

 

FIGURE 8

FIGURE 9

4

Image 4
Contents Important Safety Instructions Plan the InstallationIf the Range Hood is to be NON-DUCTED If the Range Hood is to be DuctedHorizontal Discharge Through Wall Installation PreparationWiring Connections Lamp Installing Or ReplacementFilter Installation Replacement MaintenanceService Parts DescriptionWarranty BROAN-NUTONE LLC ONE Year Limited WarrantyInstrucciones Importantes DE Seguridad PlaneamientoDescarga Horizontal a Traves DE LA Pared Preparacion InstalaciónConexiones DE Cableado Instalacion Y Reemplazo DE LamparaInstalacion Y Reemplazo DE Filtro MantenimientoPiezas DE Servicio NO. Pieza Descripcion CodigoGarantia Garantia BROAN-NUTONE LLC Limitada POR UN AÑO
Related manuals
Manual 12 pages 20.1 Kb

QT230SS specifications

The Broan QT230 series, consisting of models QT230WW, QT230BL, and QT230SS, brings a blend of style, functionality, and robust performance to your kitchen or bathroom ventilation needs. Designed with a modern aesthetic, this series features a sleek design that enhances any decor while effectively maintaining air quality.

One of the standout features of the Broan QT230 series is its quiet operation. Equipped with a powerful yet remarkably quiet motor, these units operate at a mere 0.3 sones in low speed, which ensures that your living space remains peaceful, even as unpleasant odors and excess moisture are efficiently eliminated. This is particularly valuable in open-concept living spaces where noise can easily become an issue.

The QT230 series also includes advanced technology that enhances its usability. Each model is designed with multiple speed settings, allowing users to adjust the fan speed according to their ventilation needs. Whether you’re cooking a gourmet meal or just using the bathroom, you can choose the perfect setting to maintain comfort and air quality.

Another impressive characteristic of the Broan QT230 series is its energy efficiency. These models are designed with energy-efficient motors that consume less electricity compared to conventional models, helping you save on energy bills while reducing your carbon footprint. This eco-conscious design is complemented by the effective filtration system, which captures grease and particulates from the air, ensuring your home remains fresh and clean.

Installation is also made easy with the QT230 series. The units come with a versatile design that can be mounted flush, making them suitable for various ceiling types. With easy access to the fan and filter for cleaning and maintenance, they are designed to provide long-lasting performance without hassle.

All three models in the QT230 series feature a stylish design, available in white (QT230WW), black (QT230BL), and stainless steel (QT230SS) finish. This allows homeowners to select the perfect model to match their kitchen or bathroom decor.

In summary, the Broan QT230 series is a remarkable choice for those looking for efficiency, quiet operation, and stylish design in their ventilation systems. With their advanced features and contemporary aesthetics, these range hoods and exhaust fans are ideal for enhancing the functionality and comfort of any home environment.