Settings
Networks and the Internet
When you connect this product to a network, you can use network based applications and functions such as
Configuring Your Network Connection
Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, we recommend you use the Automatic procedure below. If it is static, you must use the Manual procedure that follows.
•Before you begin, confirm that the product is connected to your router with a network cable.
❑Automatic
To start the configuration process, follow these steps:
1 . In the Home menu, select Settings, and then press the E button.
2 . Select Network, and then press the E button.
3 . Select Wired Network Settings, and then press the E button.
The Wired Network Settings screen appears.
4 . Press the ► button on the Internet Protocol Setup menu.
Use ▲▼ button to select Auto, and then press the E button.
Settings
Display |
| Wired Network Settings |
|
|
| ||||
Internet Protocol Setup | : Auto |
|
|
|
|
| |||
Audio |
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| |
Network |
| IP Address | : | 0 | 0 |
| 0 | 0 |
|
|
|
|
|
|
|
|
|
| |
System |
| Subnet Mask | : | 0 | 0 |
| 0 | 0 |
|
|
|
|
|
|
|
|
|
| |
Language | Gateway | : | 0 | 0 |
| 0 | 0 |
| |
Security DNS | : Auto |
|
|
|
|
| |||
General |
| DNS Server | : | 0 | 0 |
| 0 | 0 |
|
Support |
|
|
|
|
|
|
|
|
|
> Move " Select ' Return
5 . The Network function acquires and fills in the values for IP Address, Subnet Mask, etc., automatically.
28 English
6 . After the Network function has acquired the network values, press the RETURN (') button.
7 . Select Network Test, and then press E. The home cinema validates the network connection. When it is done, press the RETURN (') button.
❑Manual
If you have a static IP address or the Automatic procedure does not work, you’ll need to set the Network Settings values manually.
Settings
Display |
| Wired Network Settings |
|
| ||||
Internet Protocol Setup | : Manual |
|
|
| ||||
Audio |
|
|
| |||||
Network |
| IP Address | : | 0 | 0 | 0 | 0 |
|
|
|
|
|
|
|
|
| |
System |
| Subnet Mask | : | 255 | 255 | 255 | 0 |
|
|
|
|
|
|
|
|
| |
Language | Gateway | : | 0 | 0 | 0 | 0 |
| |
|
|
|
|
|
|
| ||
Security DNS | : Manual |
|
|
| ||||
General |
| DNS Server | : | 0 | 0 | 0 | 0 |
|
Support |
|
|
|
|
|
|
|
|
> Move " Select ' Return
1 . Follow the first four steps in the Automatic procedure, but select Manual instead of Auto in Step 4.
2 . Press the ▼ button to go to the first entry field (IP Address).
3 . Use the number buttons on your remote to enter numbers.
4 . When done with each field, use the ► button to move successively to the next field.
You can also use the other arrow buttons to move up, down, and back.
5 . Enter the IP Address, Subnet Mask, and Gateway values.
6 . Press the ▼ button to go to DNS.
7 . Press the ▼ button to go to the first DNS entry field. Enter the numbers as above.
8 . Press the RETURN (') button on your remote.
