Settings
The Initial Settings Procedure
•The Home menu will not appear if you do not configure the initial settings.
•The OSD (On Screen Display) may change in this product after you upgrade the software version.
•The access steps may differ depending on the menu you selected.
1 . Turn on your TV after connecting the product, and then turn on the product. When you turn on the product for the first time, the product automatically displays the Initial Settings Language screen.
Initial Settings I
Select a language for the
English
Français
Deutsch
Español
Italiano
Nederlands
> Move s Select
2 . Press the ▲▼ buttons to select the desired language, and then press the E button.
3 . Press the E button to start function setup.
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings".
Start
a Previous " Select
4 . The TV Aspect screen appears. Press the ▲▼ buttons to select desired a TV Aspect ratio, and then press the E button.
You have four choices:
16:9 Original - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and 4:3 pictures (the old, standard format) in 4:3 pillar box format with black bars on the left and right.
16:9 Full - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and expands 4:3 pictures to fill the 16:9 screen.
4:3 Letter Box - For older, standard screen analouge TVs. Displays 4:3 pictures in full screen and 16:9 pictures in letter box format that retains the 16:9 aspect ratio but puts black bars above and below the picture.
4:3
5 . The Network - Wired screen appears.
-If you have a network with dynamic IP addresses - and most people do - select Auto, press the E button, and then go to Step 6.
-If you have a network with static IP addresses, we suggest you select Skip by pressing the BLUE (D) button, and then go to "Configuring Your Network Connection" on page 27 after you have completed the initial setup. "Configuring Your Network Connection" provides a full explanation of how to configure your network connection manually.
-If you have no network, select Skip by pressing the BLUE (D) button. The Initial Settings Complete screen appears, and then the Home screen appears.
NOTE
If you skip network setup here or the setup does not work correctly, you can go to "Configuring Your Network Connection" on page 27 to set up the product's network connection later.
English 21
04 Settings
