Connections
Installing the Speakers on the Tallboy Stand
*
*
1. Turn the Stand Base | 1 | Stand Base | 2 |
connect it to the Stand. |
|
2.Use the driver to combine the screws (5x20) on the 3 marked holes.
Stand
3.Straighten a supplied speaker wire and put in the hole on the centre of Stand Base.
4.Connect the upper Speaker to the assembled Stand.
5.Insert a screw (5x15) clockwise into the hole on the rear of the speaker using a screwdriver.
And then connect a speaker cable.
6.This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
3
Speaker
Stand
5
4
6
Connecting The Speakers
1.Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each bundle to the coloured sticker on the bottom of each speaker.
2.To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire, | Black |
and then release the tab. |
|
b. Press down the black tab on the back of the speaker, insert the black |
|
wire, and then release the tab. |
|
3.Connect the speaker wire plugs to the back of the product by matching the colours of the speaker plugs to the colours of the speaker jacks.
Red
16 English