Broan QP236BC, QP242WW, QP242BL, QP236WW, QP242BC warranty Contents, Operation, Cleaning & Maintenance

Page 2

MODELS QP230BC • QP230BL • QP230SS • QP230WW QP236BC • QP236BL • QP236SS • QP236WW QP242BC • QP242BL • QP242SS • QP242WW

Page 2

CONTENTS

INCLUDED WITH THE HOOD:

 

(1) 3¼” X 10”

 

DAMPER / DUCT

 

CONNECTOR

GREASE

 

FILTERS

 

(2 - FOR 30” & 36” HOODS)

3 - FOR 42” HOODS)

 

(4)

(1) 7” ROUND

DUCT

HALOGEN

CONNECTOR

BULBS

 

(1) PARTS BAG CONTAINING:

OPERATION

Always turn the hood ON before cooking in order to establish an air flow in the kitchen. After turning off the range, let the hood run for a few minutes to clear the air.

Operate the hood as follows:

LIGHT (3 pushbutton switches)

Turns light on to LOW setting.

Turns light on to MEDIUM setting.

Turns light on to HIGH setting.

Pressing the same light button again will turn lights OFF.

(3)

WIRE NUTS

(9)

#8 X 1/4”

DUCT CONNECTOR

SCREWS

(1) BULB

SUCTION

CUP TOOL

(5)

#10 X 5/8”

RD. HD.

MOUNTING

SCREWS

(1)

NON-DUCT DIVERTER

(2)

#8 X 5/16”

MACHINE SCREWS

&

(2)

#8 WASHERS

FOR NON-DUCT

DIVERTER

A light above each button indicates light setting.

FAN (3 pushbutton switches)

Turns fan on to LOW speed.

Turns fan on to MEDIUM speed.

Turns fan on to HIGH speed.

Pressing the same fan button again will turn fan OFF. A light above each button indicates fan speed.

NOTE

This hood utilizes an offset blower design to achieve greater performance and lower sound levels. As a result, you may notice that cooking impurities are more attracted to one side or appear to be pulled-in faster than they appear on the opposite side. This

CLEANING & MAINTENANCE

For performance, appearance, and health reasons, clean filter, fan and grease-laden surfaces. Use only a clean cloth and mild detergent solution on stainless and painted surfaces.

Clean all-metal filters in the dishwasher using a non-phosphate detergent. Discoloration of the filter may occur if using phosphate detergents, or as a result of local water conditions - but this will not affect filter performance. This discoloration is not covered by the warranty.

Clean the non-duct recirculating filter surfaces frequently with a damp cloth and a mild detergent. DO NOT immerse filters in water or put in dishwasher. The special “Clean Sense” feature indicates when the filter is to be replaced. The blue and yellow strips will blend to green when it is time to change the filter. The “Clean Sense” feature works best when facing toward the cook- ing surface. Change the non-duct recirculating filters every 6 months. For replacement non-duct recirculating filters - purchase S99010353 or Model BPPF30 for 30 wide hoods”, S99010354 or Model BPPF36 for 36” wide hoods, or S99010360 or Model BPPF42 for 42” wide hoods.

The motor is permanently lubricated and never needs oiling. If the motor bearings make excessive or unusual noise, replace the motor with the exact service motor. The impeller should also be replaced.

Use 120 V, 50 W, shielded halogen bulbs - MR16 with GU10 base.

is completely normal. The hood has been designed and tested to provide good capture of cooking impurities and odors under all normal cooking conditions regardless of the cooking location on the cooktop. Please note that cooking on the rear burners will always result in the best capture of cooking impurities, regardless of the hood design.

HEAT SENTRY SYSTEM

This range hood is equipped with an advanced Heat Sentry sys- tem that monitors for excessive temperature and automatically adjusts the fan to the appropriate setting.

1)If the fan is on, the Heat Sentry system will increase the fan setting when the temperature is elevated. If the temperature con- tinues to rise, the Heat Sentry system will continue to increase the fan setting until the temperature is stabilized or reduced. The flashing light above the fan button shows the Heat Sentry system fan setting. Once the temperature has reduced, the Heat Sentry system will change the fan to the original setting.

2)If the fan is off, the Heat Sentry system will automatically turn the fan on to its highest speed when the temperature is above normal. When the Heat Sentry system is on, the light above the high speed fan button will flash on and off. After the temperature has lowered to normal, the fan speed will be reduced until the temperature has stabilized, then the fan will turn off.

Note: Canadian version does not have this function.

Image 2
Contents Evacuate and Call the Fire Department For Domestic Cooking onlyTo Reduce the Risk of a Range TOP Grease Fire Operation ContentsCleaning & Maintenance Prepare Hood Location For NON-DUCTED Installations Skip to Install the Hood For Ducted Installations Skip to StepNON-DUCTED Installation only Prepare the HoodRemove Electrical Wiring Box Cover from inside Install the HoodDucted Installation only Damper Flap Pivot nearest the Top/Back Edge of HoodWarranty Connect the WiringInstall Light Bulbs Remove 2 Light Panel Screws and Light Panel. Set97018246 Service PartsDescription 97018247Pour Usage Domestique Seulement Avertissement Avertissement RemarqueFonctionnement ContenuNettoyage ET Entretien DE Larmoire FusibleAvant DE ’ARMOIRE Dessous Ligne DEVIS Préparation DE LA HotteFente Plaque NONRemarques Installation DE LA HotteInstallation Avec Conduits Seulement Enlevez le couvercle du boîtier de connexion électriqueGarantie Installation DesampoulesRaccord DU Câblage VIS DE Mise À LA Terre Câble Électriqe DE LA MaisonLes pièces par Veuillez commanderPièces DE Rechange Pièce et nonNota Solamente Para Cocinar EN Casa Advertencia AdvertenciaPrecaución Nota la versión canadiense no tiene esta función ContenidofuncionamientoLimpiezay Mantenimiento NotaConducto Horizontal DE LíneaCentral Frente DEL10 Únicamente EN Instalaciones SIN Conductos Prepare LA CampanaÚnicamente EN Instalaciones SIN Conductos 11 Únicamente EN Instalaciones SIN ConductosAcople el conector del regulador de tiro/conducto de Instale LA Campana13 Únicamente EN Instalaciones CON Conductos NotasGarantía Conecte EL CableadoInstale LAS Bombillas 21 Únicamente EN Instalaciones CON ConductosDescripción Piezas DE ServicioClave N.º Pieza N.º DE Clave
Related manuals
Manual 21 pages 59.94 Kb

QP230BC, QP242SS, QP230BL, QP236BL, QP236SS specifications

The Broan QP242BC, QP242SS, QP236BL, QP242WW, and QP230WW range hoods are sophisticated ventilation solutions designed to enhance kitchen environments. These models not only deliver superior performance but also blend functionality with style.

One of the standout features of these range hoods is their sleek design, available in various finishes, including black, stainless steel, and white. This variety allows homeowners to select a model that seamlessly integrates with their existing kitchen decor. The hoods are designed to sit flush with cabinetry, creating a streamlined appearance.

These hoods are engineered with powerful ventilation systems that ensure effective air purification. They feature multi-speed blowers, typically featuring at least three different settings, allowing users to customize airflow based on their cooking needs. The efficiency is backed by a high CFM (cubic feet per minute) rating, which indicates their ability to quickly eliminate smoke, odors, and grease from the kitchen.

An important technology incorporated into these Broan hoods is the quiet operation feature. Many models utilize advanced noise-reduction technologies, ensuring that the ventilation fans operate at lower decibel levels, allowing for a more enjoyable cooking experience without disruptive background noise.

The easy-to-use controls are another significant aspect of the Broan hoods. Most models come equipped with modern push-button or slider controls, making it simple to adjust fan speed according to the level of cooking activity. Additionally, some versions include an integrated lighting system, often featuring energy-efficient LED bulbs that provide excellent illumination for the cooking surface while adding to the aesthetic appeal.

Furthermore, many of these models are designed with easy maintenance in mind. They often come with dishwasher-safe filters that trap grease and can be easily cleaned, ensuring the longevity and performance of the unit.

Safety is also a priority; some models feature a heat sentry function that automatically adjusts the fan speed if it detects excessive heat, providing added protection in the kitchen.

In summary, the Broan QP242BC, QP242SS, QP236BL, QP242WW, and QP230WW range hoods represent a harmonious blend of style, technology, and efficiency. With their powerful performance, user-friendly features, and attractive designs, these hoods are an excellent choice for any modern kitchen looking to elevate its ventilation system.