Broan QP142WW, QP142SS, QP142BL manual Connect the Wiring, Install Light Bulbs, Warranty

Page 6

MODELS QP142SS • QP142WW • QP142BL

CONNECT THE WIRING

GROUND

SCREW

HOUSE

POWER CABLE

18 Connect House Power Cable to range hood wiring - BLACK to BLACK, WHITE to WHITE, and GREEN or

BARE WIRE to Ground Screw. Replace electrical wiring box cover.

19 Re-attach Bottom Pan with 6 Screws removed in Step 6.

INSTALL LIGHT BULBS

 

SUCTION

 

CUP TOOL

HALOGEN

(1)

PUSH IN

BULB

 

(2)

 

ROTATE

 

CLOCKWISE

 

LIGHT PANEL

 

SCREWS

LIGHT PANEL

 

CAUTION: Bulbs may be hot. Refer to bulb packaging for further information.

20 Install (4) Halogen Bulbs. Use 120 V, 35 W, shielded halogen bulbs - MR16 with GU10 base. Purchase bulbs

separately.

NOTE: Suction Cup Tool (included with hood) can be used to install and remove light bulbs.

Align pins on bulb with large diameter opening on socket, then push bulb in towards hood and rotate clockwise until firmly seated.

The position of the bulb socket (depth) is adjustable and may be necessary when:

a)certain brands of bulbs are difficult to install.

b)the bulb protrudes too far below the light panel.

Page 6

LAMP SOCKET

BRACKET

LIGHT

SCREWS

PANEL

To change the depth of bulb sockets:

-Remove bottom pan (See Step 6).

-Remove 2 Light Panel Screws. Set screws aside.

-Loosen 2 Screws holding Lamp Socket Bracket to Light Panel.

-Adjust socket/bracket to desired depth.

-Re-tighten screws securely.

-Re-attach light panel and bottom pan.

21DUCTED INSTALLATION ONLY:

Re-install aluminum filters removed in Step 5.

NON-DUCTED INSTALLATION ONLY:

Install aluminum filters and non-ducted filters - purchased and assembled in Step 11.

WARRANTY

One Year Limited Warranty

Broan-NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one

(1)year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

During this one year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service. THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES, HALOGEN AND INCANDESCENT BULBS, FUSES, FILTERS, DUCTS, ROOF CAPS, WALL CAPS AND OTHER ACCESSORIES FOR DUCTING. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other than by Broan-NuTone), faulty installation or installation contrary to recommended installation instructions.

The duration of any implied warranty is limited to the one year period as specified for the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

BROAN-NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE’S OPTION, SHALL BE THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN-NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.

To qualify for warranty service, you must (a) notify Broan-NuTone at the address or telephone number below, (b) give the model number and part identification and (c) describe the nature of any defect in the product or part. At the time of requesting warranty service, you must present evidence of the original purchase date.

Broan-NuTone LLC, 926 W. State Street, Hartford, Wisconsin 53027 www.broan.com 800-558-1711

Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario Canada L5T 1H9

www.broan.ca 877-896-1119

Rev. 08/2007

Image 6
Contents For Domestic Cooking only To Reduce the Risk of a Range TOP Grease FireEvacuate and Call the Fire Department Operation ContentsCleaning & Maintenance Prepare Hood LocationHorizontal Ducting Prepare the HoodVertical Ducting RoundPlate NON-DUCTED Installation onlyAIR BOX SlotInstall the Hood Ducted Installation onlyConnect the Wiring Install Light BulbsWarranty Service Parts DescriptionPour Usage Domestique Seulement Avertissement Avertissement RemarqueContenu FonctionnementNettoyage ET Entretien Préparation DE LA Hotte VIS Installation Sans Conduit SeulementFente Plaque NONInstallation DE LA Hotte Installation Avec Conduits SeulementGarantie Installation DES AmpoulesRaccord DU Câblage VIS DE Mise À LA Terre Câble Électriqe DE LA MaisonPièces DE Rechange Repère DE Pièce DescriptionSolamente Para Cocinar EN Casa Advertencia PrecauciónContenido FuncionamientoLimpiezay Mantenimiento Prepare LA Campana Recipiente Inferior11 Únicamente EN Instalaciones SIN Conductos Únicamente EN Instalaciones SIN Conductos10 Únicamente EN Instalaciones SIN Conductos Instale LA Campana 17 Únicamente EN Instalaciones CON ConductosGarantía Conecte EL CableadoInstale LAS Bombillas 21 Únicamente EN Instalaciones CON ConductosPiezas DE Servicio DescripciónDE Clave

QP142BL, QP142SS, QP142WW specifications

The Broan QP142 Series comprises three stylish under-cabinet range hoods: QP142SS (stainless steel), QP142WW (white), and QP142BL (black). These hoods are designed to enhance any kitchen decor while providing exceptional ventilation performance essential for maintaining air quality during cooking.

One of the main features of the Broan QP142 Series is its powerful motor that offers a maximum air movement of 250 CFM, ensuring that smoke, odors, and grease are effectively removed from the kitchen environment. This efficiency is critical, especially in kitchens where heavy cooking occurs, as it helps to maintain clean air and a pleasant cooking experience.

The QP142 models incorporate a sleek design with soft edges, making them not only functional but also visually appealing. Their under-cabinet installation allows for an unobtrusive fit in any kitchen, ensuring that they seamlessly blend into existing cabinetry. The range hoods are also available in three distinct colors: stainless steel, white, and black, catering to various kitchen aesthetics and personal preferences.

In terms of technology, the Broan QP142 Series is equipped with a multi-speed motor. This feature allows the user to adjust the speed according to their cooking needs, whether it is a light simmer or a full-scale sauté. The user-friendly controls make it easy to switch between speeds, offering convenience during busy cooking times.

Additionally, the QP142 models have integrated dishwasher-safe aluminum grease filters that capture harmful particulates, ensuring optimal performance and easy maintenance. Regular cleaning of these filters not only enhances efficiency but also prolongs the lifespan of the range hood.

Another notable characteristic of the Broan QP142 Series is its built-in lighting. The hood features a two-level lighting system, providing both task and ambient lighting. This feature significantly enhances visibility over the cooking surface, making it easier to prepare meals while creating an inviting kitchen atmosphere.

In conclusion, the Broan QP142SS, QP142WW, and QP142BL are ideal choices for anyone looking for a combination of style, performance, and convenience in a kitchen range hood. With powerful ventilation, user-friendly features, and a sleek design, these models exemplify what modern kitchen appliances should deliver. Whether you are a casual cook or a culinary enthusiast, the Broan QP142 Series is designed to elevate your cooking experience while keeping your kitchen air fresh and clean.