Panasonic HDC-HS100PC Install a button-type battery supplied, Remote control usable range

Models: HDC-HS100PC HDC-HS100P

1 160
Download 160 pages 58.71 Kb
Page 21
Image 21

Install a button-type battery (supplied)

1 While pressing the stopper A, pull out the battery holder.

2 Set the button- type battery with its (i) mark facing upward and then put the battery holder back in place.

When the button-type battery runs down, replace it with a new battery (part number: CR2025). The battery should normally last about 1 year, however this depends on how frequently the unit is used.

Keep the button-type battery out of reach of children to prevent swallowing.

Replace battery with Panasonic PART NO. CR2025 only. Use of another battery may present a risk of fire or explosion.

Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep away from children.

Do not recharge, disassemble or dispose of in fire.

Remote control usable range

ARemote control sensor

Distance: Within approx. 5 m (16 feet)

Angle: Approx. 10o up and 15o down, left, and right

The remote control is intended for indoor operation. Outdoors or under strong light, the unit may not operate properly even within the usable ranges.

21

VQT1T93

Page 21
Image 21
Panasonic HDC-HS100PC operating instructions Install a button-type battery supplied, Remote control usable range