Panasonic HDC-HS100PC Connecting to the AC outlet, Battery capacity indication

Battery capacity indication

≥The display changes as the battery capacity reduces. # # # #

If there is less than 3 minutes remaining, then will become red. If the battery discharges,

then ( ) will flash.

≥The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. It may take time to display the remaining battery capacity. The actual time can vary depending on your actual use.

≥The maximum amount of remaining battery capacity able to be indicated is 9 hours 59 minutes. If the actual remaining time exceeds 9 hours 59 minutes, the indication will stay green and will not change until the remaining time falls below 9 hours 59 minutes.

≥When turning the mode dial to switch modes, the time indication will turn off momentarily in order to recalculate the remaining battery capacity time.

≥When using the AC adaptor or batteries made by other companies, the remaining battery capacity will not be shown.

Connecting to the AC outlet

Important:

While the DC cable is connected to the AC adaptor, the battery will not charge.

≥Do not use the AC cable with any other equipment as it is designed only for this unit. Do not use the AC cable from other equipment with this unit.

DC IN

 

ADC output terminal B DC input terminal

Insert the DC cable so the [] mark is pointing upward matching the [] mark of the DC input terminal.

1 Connect the AC cable to the AC adaptor and the AC outlet.

2 Connect the DC cable to the AC adaptor.

3 Connect the DC cable to the DC input terminal [DC IN].

25

VQT1T93