Panasonic HDC-HS100PC Built-in flash, Red eye reduction, Shutter sound, Auto slow shutter

Function

Effect/Setting method

Built-in flash	When the	button is pressed, the flash is activated and the
	picture will be recorded. Use the built-in flash in order to record
	still pictures in dark places.

Select the menu. (l 29)

[RECORD SETUP] # [FLASH] # [AUTO] or [ON]

≥This function’s default setting is [AUTO].

≥When the button is pressed halfway, the flash indicator will

	appear in the bottom left corner of the screen.
	[ON]:		ß
	[AUTO]:		ßA
	[OFF]:
	≥ When [AUTO] is set, the ambient brightness is automatically
	detected, and the flash will activate only when necessary. (If the
	flash is not necessary, the [ßA] indicator will not appear when the
		button is pressed halfway.)
	∫ To adjust the brightness of the flash
	Select the menu. (l 29)
	[RECORD SETUP] # [FLASH LEVEL] # desired setting
	[ßj]:	Less brighter
	[ßd0]: Normal
	[ßi]:	Much brighter
Red eye reduction	Reduces the phenomena where human eyes become red from
	flashes.
	Select the menu. (l 29)
	[RECORD SETUP] # [RED EYE] # [ON]
Shutter sound	You can add a shutter sound when recording still pictures.
	Select the menu. (l 29)
	[RECORD SETUP] # [SHTR SOUND] # [ON]
	≥ This function’s default setting is [ON].
Auto slow shutter	You can record bright pictures even in dark places by slowing
	the shutter speed.
	≥ The Intelligent auto mode is set to [OFF]. (l 51)
	Select the menu. (l 29)
	[ADVANCED] # [AUTO SLOW SHTR] # [ON]
	≥ The shutter speed is adjusted between 1/30 and 1/250 depending
	on the surrounding brightness. (When adjusting the shutter speed
	manually, it can be adjusted between 1/30 and 1/8000.)
	≥ If [AUTO SLOW SHTR] is set to [OFF], then the shutter speed will
	be set between 1/60 and 1/250. (When adjusting the shutter
	speed manually, it can be adjusted between 1/60 and 1/8000.)

61

VQT1T93