Panasonic HDC-HS100PC Quick Guide, Charging the battery, Inserting the battery

Quick Guide

∫Charging the battery

Charging lamp [CHARGE] A

Lights up:

Charging

Goes off: Charging completed

1)Connect the AC cable to the AC adaptor and the AC outlet.

2)Insert the battery into the battery charger by aligning the arrows.

∫Inserting the battery

Install the battery by inserting it in the direction shown in the figure.

AInsert the battery until it clicks and locks.

∫How to turn on the power

Turn on the power by turning the mode dial to

or while pressing the lock release button A.

≥Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode.

≥Align with the status indicator B.

≥To turn off the power, set the mode dial to OFF.

12

∫Inserting/removing an SD card

Card access lamp [ACCESS] A

≥When this unit is accessing the card, the access lamp lights up.

1)Open the LCD monitor.

≥Check that the card access lamp has gone off.

2)Open the SD card cover by sliding the OPEN lever B.

3)Insert/remove the SD card.

≥When inserting an SD card, face the label side C in the direction shown in the illustration and press it straight in as far as it will go.

≥When removing the SD card, press the center of the SD card and then pull it straight out.

4)Securely close the SD card cover. ≥ Securely close it until it clicks.

VQT1T93