Panasonic HDC-HS100PC Creating still picture from motion picture, Motion picture compatibility

Motion picture compatibility

≥This unit is based on the AVCHD format.

≥The video signal that can be played back on this unit is 1920k1080/60i, 1920k1080/24p or 1440k1080/60i.

≥This unit may degrade or not play back motion pictures recorded or created on other products, and other products may degrade or not play back motion pictures recorded on this unit, even if the products support AVCHD.

≥Sound will be heard only during normal playback.

≥If pause play is continued for 5 minutes, the screen returns to the thumbnails.

≥Any scenes where the thumbnails are

displayed as cannot be played back. An error message appears and the screen shows the thumbnails.

≥During motion picture playback, the power will not turn off even if the LCD monitor is closed.

≥The remaining time for playback indication will be reset to “0h00m00s” each scene.

≥A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every 4 GB of data when played back with another device.

Creating still picture from motion picture

A single frame from the recorded motion picture can be saved as a still picture.

1 Pause at the scene you want to

save as a still picture during playback.

≥It is convenient to use slow-motion playback and frame-by-frame playback.

2 Press the button fully.

Still picture is recorded and will be saved on the same media as the motion picture.

≥You might get a blurry still picture if you press

the button without pausing.

≥Date the motion picture was recorded will be registered as date of the still picture. (The date still picture was created will be registered if there is no date recorded for the motion picture.)

≥Quality will be different from the normal still picture.

Playing back motion pictures by date

Scenes recorded on the same day can be played back in succession.

1 Select (By date), then press the cursor button.

2 Select the playback date, then press the cursor button.

77

VQT1T93