Panasonic HDC-HS100P Dubbing images onto other, Video device, Change the video input on

products	2	Dubbing images onto other
With other
		video device

Images played back on this unit can be dubbed onto a DVD recorder or video device.

≥Images are dubbed in standard quality.

≥Use the AC adaptor to free you from worrying about the battery running down.

	Change the video input on the
	video device and TV that this unit
	is connected to.
	≥ The channel set will differ depending on
	the terminal to which the unit is connected.
AV/	≥ See the operating instructions of the video
	device for details.
	≥ Insert the plugs as far as they will go.

≥ Do not use any other AV cables except the supplied one.

A AV cable (supplied)

1 Connect this unit to a video device and then set the mode dial to .

≥Set [AV JACK] to [AV OUT]. (l 96)

2 Start playback on this unit.

3 Start recording on the connected device.

≥To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.

≥If the date and time display and function indication are not wanted, cancel them before dubbing. (l 33, 94)

If the dubbed images are played back on a wide-screen TV, the images may be stretched vertically. In this case, refer to the operating instruction of the device you are connecting to or read the operating instructions of the wide-screen TV and set the aspect ratio to 16:9.

108

VQT1T93