Panasonic HDC-HS100PC operating instructions Offon, Minutes, Av Out, Headphone

∫[SETUP] [CLOCK SET] (l 33) [DISPLAY]

The screen indications are selected as shown in the illustration below.

[OFF][ON]

1h30m

R 1h20m

NOV 15 2008 NOV 15 2008

[DATE/TIME] (l 33) [DATE FORMAT] (l 33)

[POWER SAVE]

[OFF]:

The power saving function is not activated.

[5 MINUTES]:

When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life.

≥The power save function will not activate when:

jconnected to AC adaptor

jusing the USB for PC, DVD burner, printer jPRE-REC is used

[QUICK POWER ON]*3 (l 40) [QUICK START] (l 40)

[BEEP SOUND]

This allows operations such as starting and ending recording to be signaled by a beep.

1 Beep

When you start recording When you turn on the power

When this unit is recognized by the PC or the printer, etc.

2 Beeps

When you pause recording

When you turn off the power

2 Beeps for 4 times

When an error occurs. Check the sentence displayed on the screen. (l 127)

[POWER LCD] (l 35) [LCD SET] (l 35) [EVF SET] (l 35) [COMPONENT OUT] (l 96) [HDMI RESOLUTION] (l 95) [VIERA Link] (l 97)

[TV ASPECT] (l 94) [AV JACK]

Output from the AV/headphone output terminal can be set to [AV OUT] or [HEADPHONE].

[AV OUT]:

When AV cable is used

[HEADPHONE]:

When headphone is used

≥You will hear a buzzing sound when it is set to [AV OUT] while using a headphone.

[INITIAL SET]

Set to [YES] for changing the menu settings back to the default condition.

(Settings for [CLOCK SET], [MEDIA SELECT] and [LANGUAGE] will not be changed.)

[FORMAT CARD]*3 (l 91)

[FORMAT HDD]*4 (l 91)

[DEMO MODE]

This item is used to start the unit demonstration.

(Only when the mode dial is at the position)

If [DEMO MODE] is switched [ON] when there is no SD card inserted and while this unit is connected to the AC adaptor, the demonstration automatically starts. If any operation takes place, the demonstration is canceled. However if no operations take place for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration, set [DEMO MODE] to [OFF] or insert an SD card.

∫[LANGUAGE] (l 30)

31

VQT1T93