Broan 355CSOBK, 355CSOBR warranty Read and Save These Instructions, Tools and Materials Required

Page 1

MODELS 355CSOBK • 355CSOBR

ROOF-MOUNT CURB SOLAR POWERED ATTIC VENTILATOR

Page 1

READ AND SAVE THESE INSTRUCTIONS

WARNING

TO REDUCETHE RISK OF FIRE,ELECTRIC SHOCK,OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1.Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty.

2.Before servicing or cleaning unit, disable the ventilator by cover- ing the solar panel with cardboard or disconnecting the wires from the motor terminals (note wire locations when disconnect- ing).

3.Installation work must be done by a qualified person(s) in ac- cordance with all applicable codes and standards, including fire-rated construction codes and standards.

4.If removing an existing 120 VAC powered attic ventilator, use only a qualified person(s) to remove any electrical wiring in accordance with all applicable codes and standards.

5.Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent backdrafting.Follow the heating equipment manufac- turer's guidelines and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Condition- ing Engineers (ASHRAE), and the local code authorities.

6.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

TOOLS AND MATERIALS REQUIRED

rDrill

r1/4" Drill Bit

rSabre Saw or Keyhole Saw

rHammer

rRuler / Tape Measure

rPencil, Marker or Scribe

rUtility Knife

rPry Bar (to remove roofing nails)

r5/16" Socket and Extension

rRoofing Cement

rGalvanized Roofing Nails (1¾" min.)

CAUTION

1.For general ventilating use only. Do not use to exhaust hazard- ous or explosive materials and vapors.

2.To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall spray, construction dust, etc. off power unit.

3.This unit has an unguarded impeller. Do not use in locations readily accessible to people or animals.

4.This ventilator operates when the solar panel is exposed to sun light. To reduce risk of injury while installing, servicing or cleaning unit, cover the solar panel with cardboard or discon- nect the wires from the motor terminals (note wire locations when disconnecting).

5.The recommended open air inlet for this ventilator is 4.25 square feet. The best location for these air intake vents are under the eaves with direct access to the attic. Failure to pro- vide these intakes could cause natural-draft gas appliances to backdraft.

6.Your attic fan installation will create a screened opening into your attic space. During a heavy rain storm there could be a light spray of rain into this attic space. This is a normal condi- tion with all attic ventilators and will not cause any damage to the structure. We recommend that you do not store any valu- able articles directly under the fan opening in the roof.

7.This ventilator is intended for roof installation. Broan Models 353 & 353SOBK Gable Mount Ventilators are available for side wall applications.

8.The plastic ventilator dome and base may be painted with high quality paint. Follow the paint manufacturer's recommen- dations for acrylic and ABS plastic as appropriate. Take care to avoid getting paint on the solar panel.

9.Please read specification label on product for further informa- tion and requirements.

10.The installation instructions contained in this document are only a recommendation and individual professionals may have their own methods of installation. If your roof has an existing warranty, installation of this product by anyone other than those who installed the roof may jeopardize any future warranty claim. Please check with the original installer of your roof if this is a concern.

Register your product online at:

www.broan.com/register

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Tools and Materials Required Read and Save These InstructionsInstallation MIN 16-1/8 19-1/4 Models 355CSOBK 355CSOBR 355CSOBK 355CSOBR Service PartsBROAN-NUTONE LLC WarrantyOutils ET Matériel Requis AvertissementInstallation MIN cm 2 po 41 cm 16-1/8 po 49 cm 19-1/4 po Modèles 355CSOBK 355CSOBR Pièces DE Rechange Garantie Herramientas Y Materiales Requeridos AdvertenciaPrecaución Página InstalaciónPágina Modelos 355CSOBK 355CSOBR Negro Café Piezas DE ServicioGarantía Modelos 355CSOBK 355CSOBR Modelos 355CSOBK 355CSOBR

355CSOBK, 355CSOBR specifications

The Broan 355CSOBR and 355CSOBK range hood models are renowned for their blend of functionality and aesthetic appeal in modern kitchens. Designed for those who value both performance and style, these range hoods are ideal for efficient ventilation, ensuring that your cooking environment remains fresh and free from smoke, odors, and grease.

One of the standout features of the Broan 355CSOBR and 355CSOBK is their powerful 600 CFM internal blower. This high-capacity motor effectively captures smoke and steam, making it suitable for a variety of cooking practices, including frying and grilling. The adjustable speed settings allow users to customize the air circulation based on their cooking needs, ensuring optimal performance without excessive noise.

Both models come equipped with a sleek, stainless steel construction that not only enhances durability but also complements contemporary kitchen decor. The brushed finish adds a touch of elegance and is easy to clean, making maintenance effortless. The 355CSOBR is designed with a rich bronze finish, while the 355CSOBK sports a striking black design, providing options that can blend seamlessly into different kitchen styles.

An important technological aspect of the Broan 355CSOBR and 355CSOBK is their integrated lighting. These hoods feature dimmable LED lights that illuminate the cooking surface, enhancing visibility while also being energy-efficient. This attention to detail not only improves the cooking experience but also accentuates the kitchen’s ambiance.

The easy-to-use control panel simplifies the operation of the range hoods, allowing users to adjust settings with minimal effort. Additionally, both models come with washable filters that can be easily removed and cleaned, ensuring that the range hood operates efficiently over time.

Installation flexibility is another notable characteristic of these models. They are designed for both ducted and ductless installations, giving homeowners the versatility to pick the setup that best fits their kitchen layout.

In summary, the Broan 355CSOBR and 355CSOBK range hoods bring together high performance, aesthetic design, and user-friendly features. With their powerful ventilation capabilities, energy-efficient lighting, and stylish finishes, they are excellent additions to any modern kitchen, ensuring a comfortable cooking experience and a refined look.
Top Page Image Contents