Cannon 10548G, 10545G, 10540G installation instructions Step

TIMER OPERATION

b)TO SET TIMER TO SWITCH ON IMMEDIATELY AND OFF AUTOMATICALLY AFTER A SET COOK PERIOD

Step 1Check that the correct time of day is set, if not follow instructions for setting the time of day.

Step 2Place food onto the correct shelf position in the oven and close the oven door(s).

Step 3Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven function.

Step 4 Press & hold in the "Cook Period" button, the display will read 0.00

and the cookpot symbol will light up.

With the Cook Period button still held set the required Cook Period using the "+" and "–" buttons, the "A" symbol will light up. Example: 1hr 30 minutes).

Note: Cook Period is the length of time the food requires to cook.

Step 5 Release all buttons.

The timer display will revert to the time of day with the Auto symbol "A" lit &

Cookpot symbol remaining lit.

At the end of the Cook Period the"A" symbol will flash and an intermittent bleeping

sound will be heard. The cookpot symbol will go out.

The bleeping sound will continue for several minutes unless cancelled. (see step 6) The "A" symbol will continue to flash until the timer is returned to Manual operation (see below).

Step 6 Press the "Cook Period" button to cancel the bleeping.

Step 7	Turn the oven control(s) to the OFF position.
Step 8	Press the "Cook Period" and "End Time" buttons together to return
	the cooker to Manual operation. (The "A" symbol will go out, and the
	Cookpot symbol will light up).

Note 1 When cooking automatically the Cook Period can be checked at any time by simply pressing the Cook Period button.

Note 2 When cooking automatically the End Time can be checked at any time by simply pressing the End Time button.

11