Cannon C60DH installation instructions Electrical Connection

Page 28

ELECTRICAL CONNECTION

Warning - THIS APPLIANCE MUST BE EARTHED

The cooker must be connected by a qualified electrician to a suitable double - pole control unit with a minimum rating of 32A and a minimum contact clearance of 3mm, which should be fitted adjacent to (but not above) the cooker, in accordance with IEE regulations.

The power supply cable should conform to BS6004 with a conductor size of 4mm2.

The control unit should be easily accessible in the event of an emergency.

This appliance conforms to EN55014 regarding suppression of radio and television interference.

Access to the mains terminals is gained by removing the rear access cover.

The mains cable must pass through the cable clamp and the screws must be fully tightened. Sufficient cable should be used to allow the cooker to be pulled out for servicing. Ensure that the cover is fully closed and secure afterwards.

Take care not to trap the mains cable when pushing the cooker into its final position.

28

Image 28
Contents Harrogate Contents Introduction For Your Safety Please read the precautions below before using your cookerFor Your Safety Automatic Cooking Oven Timer OperationGuidance on Automatic Cooking Clockface Setting the Time of DAY Auto Cooking Programmes Oven Timer Operation Other Notes on Timer Operation Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireGrill PAN Handle GrillTo USE the Grill Ovens TOP Oven Conventional CookingTo USE the TOP Oven Main Oven FAN CookingBaking Fan Oven CookingOven Cooking Charts Top Oven CookingSlow Cook Setting Using the ‘S’ Setting for Slow CookingCare and Cleaning Oven Heat Clean LiningsReplacement of Oven Light Bulb Oven DoorsCooker Finish Cleaning Method Problem Check Something Wrong With Your CookerDisposal of your product Disposal of old electrical appliancesInstallation Instructions GAS Safety Installation & USE RegulationsModel Numbers C60DH LocationTechnical Data G20 at 20mbarG31 at 37mbar BurnerSpace for Fixing Cooker HoodsLevelling Unpacking the CookerConversion for USE on Butane G30 or Propane G31 Connecting to GAS Supply Stability ChainElectrical Connection Installation and Operational Checks Page Page After Sales Service Repair Service and Information Help DeskGenuine Parts & Accessories Extended Warranties