Capresso Z6, Z5 Adjusting the Grinder, Using Pre-Ground Coffee, Overriding Pre-Set Values

K) Adjusting the Grinder

Important: You can only adjust the fineness during the actual grinding process.

•For darker, oily beans, grind somewhat coarser. For lighter beans, grind somewhat finer.

•Open the Cover Lid and turn the Grind Selector while grinding (Fig. 4).

Coarser: turn the dial towards the bean symbol;

Finer: turn away from the bean symbol.

L) Using Pre-Ground Coffee

COFFEE READY. Open the Cover Lid. Open the Lid for ground coffee (Fig. 4). PRE-GROUND FILL POWDER. Add one or two scoops of coffee and close Lid for ground coffee. PRE-GROUND / SELECT PRODUCT. Place a cup under the coffee spouts or the ACS system and choose the coffee button with which you want to brew coffee.

COFFEE READY.

M) Overriding Pre-Set Values

Strength Settings: Just before pushing one of the coffee buttons turn the Rotary Dial and select from XMILD, MILD, NORMAL, STRONG, XSTRONG. Push one of the coffee buttons within three seconds and the selected strength setting shows while the Z5/Z6 grinds.

Coffee Volume: During grinding, turn the Rotary dial and select any volume from 1 oz. to 8 oz.

Important: If you use the 2-cup buttons the cup size shown in the display is per cup!

Overriding the Milk Volume for the Cappuccino Button: First select the Strength Setting (above). Then push the Cappuccino Button. When the display shows MILK 15 SEC turn the Rotary Dial to change the seconds. (You can always stop the frothing by pushing the Rotary Dial). When the milk stops and the coffee brewing starts turn the Rotary Dial again to change the coffee volume.

Please Note: Overriding does not change the pre-set values (see chapter D).

N)Re-programming Pre-set values

COFFEE READY

Volume (cup size) can be permanently re-set as follows: Place a cup underneath the corresponding spout. Then push and hold the beverage button you want to change permanently until the display shows

ENOUGH? PRESS BUTTON.

When you have enough coffee or milk or water in your cup, press the same beverage button again. From now on, this volume is stored in the Z5/Z6.