NordicTrack NTTL11994 user manual Operation Adjustment, Performant Lube TM Walking Belt

OPERATION

AND ADJUSTMENT

THE

PERFORMANT

LUBE TM WALKING

BELT

electric shock. This product is equipped

with a cord

having an equipment-grounding conductor and a

Your

treadmill

features

a walking belt coated

with

grounding

plug. Plug

the

power

cord into

a surge

PERFORMANT

LUBE TM, a high-performance

lubricant.

protector,

and

plug

the

surge

protector

into

an ap-

IMPORTANT:

Never apply

silicone

spray

or other

propriate

outlet

that

is

properly

installed

and

substances

to the walking

belt or the

walking plat-

grounded

in

accordance

with

all

local

codes

and

form.

They

will

deteriorate

the walking

belt and

ordinances.

Important:

The treadmill

is

not

com-

cause

excessive wear.

patible

with

GFCl-equipped

outlets.

HOW TO PLUG IN THE POWER CORD

This product

is for use on a nominal

120-volt circuit,

and has a grounding plug that looks like the plug illus-

DANGER: Improper

trated in drawing 1 below. A temporary adapter that

connection looks like the adapter

illustrated

in drawing

2 may be

of the equipment-grounding conductor can

used to connect the surge protector to a 2-pole recep-

tacle as shown in drawing 2 if a properly grounded out-

result in an increased risk of electric shock,

let

is not available.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

The temporary adapter should be used only until a

product is properly grounded, Do not modify

properly grounded outlet (drawing 1) can be installed

the plug provided with the product--if it will

by a qualified

electrician.

not fit the outlet, have a proper outlet in-

stalled by a qualified electrician,

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

Your treadmill, like any other type of sophisticated

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

electronic equipment, can be seriously damaged by

by a metal screw. Some 2-pole receptacle outlet box

sudden voltage changes in your home's power.

covers

are not

grounded.

Contact

a qualified

elec-

Voltage surges, spikes, and noise interference can re-

trician to determine if the outlet box cover is

sult from weather conditions or from other appliances

grounded before using an adapter.

being turned on or off.

To decrease the pos-

sibility

of

your

tread-

1

Outlet

Box

mill

being

damaged,

Treadmill

Power

always

use

a surge

Grounding

Pin

protector

(not

in-

cluded)

with

your

_gPlug

Grounding

treadmill.

Surge protectors are sold at most hardware stores and department stores. Use only a UL- listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

This product must be grounded. If it should malfunction or break down, grounding pro- vides a path of least re- sistance for electric cur- rent to reduce the risk of

Grounded Outlet

/Adapter

Grounding Plug

Lug	I
Metal Screw/

Surge Protector