Capresso Impressa F7 warranty Fill Water, Tips for Better Coffee Height adjustable coffee-spout

Page 22

5.The displays still shows SOLVENT IN TANK / OPEN TAP. Turn the Steam/Water Selector to the water symbol. The machine will pump the mixture through the frother in intervals. During this procedure the display shows DECALC.ON. When this cycle is finished the display shows CLOSE TAP.

6.Turn the Steam/Water Selector back to the cup symbol. The display shows DECALC.ON. Now the machine pumps the mixture through the coffee spout into the drawer.

7.When this cycle is completed the display shows EMPTY TRAY. Remove the container from underneath the frother. Carefully lift and remove the drawer, empty and thoroughly rinse all parts and replace. The display shows

FILL WATER.

8.Remove the water tank, rinse thoroughly, fill with cold fresh water and replace.

9.Place a large container (at least 20 oz.) underneath the frother. The display shows OPEN TAP.

10.Turn the Steam/Water Selector to the water symbol. The machine will pump hot water through the frother in intervals. During this procedure the display shows DECALC.ON. When this cycle is finished the display shows CLOSE TAP.

11.Turn the Steam/Water Selector back to the cup symbol. The display shows DECALC.ON. Now the machine pumps hot water through the coffee spout into the drawer.

12.When the cleaning cycle is completed the display shows EMPTY TRAY. Remove the container from underneath the frother. Carefully lift and remove the drawer, empty and thoroughly rinse all parts and replace. The display shows HEATING and then PRESS RINSE.

13.Push the Rinse Button. The machine will run a regular rinse

cycle and the display will show READY.

14.Clean front of machine and grid with a moist, soft cloth. Attention: You can run a decalcifying cycle at anytime even if the machine does not prompt you.

• Turn the machine off. Push and hold the Rinse button until display shows EMPTY TRAY.

• Continue with step 2 above.

21.TIPS FOR BETTER COFFEE Height adjustable coffee-spout

Adjust the height of the coffee-spout to the size of your cups.

Grinding

Please refer to chapter 8 "Adjusting the Grinder."

Pre-warm cups

You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important it is to warm your cups.

Sugar and cream

Warmth is lost by stirring the contents of the cup. Adding milk or cream from the refrigerator considerably lowers the temperature of the coffee. You can preheat milk and cream with the frother.

22.SUPPLIES AND ACCESSORIES

The following supplies are necessary to keep your machine in good working order:

•Clearyl Water Filter Cartridge (model# 64533)

•Special Cleaning Tablets (model# 62205)

•Decalcifying Tablets (white, square) model# 61848

Please note: You must use decalcifying tablets if you do not use the Clearyl cartridge.

22.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Impressa F7 Important Safeguards Customer Service Jura-Capresso LLCPage Ready Dual Frother Plus Metal Tube Chrome Sleeve Steam Nozzle Table of Contents Product Registration 3c. Coffee Facts PLEASE, DON’T... or you void your warranty protection3b. Different Coffee Drinks PLEASE, doFactory Settings Preparing the Machine for the First TimeDaily Preparation Adjusting the GrinderAdding Coffee Beans ON/OFF Button Heating Rinse ReadyGrinding times approx. Mild ......... to 7 seconds Using PRE-GROUND CoffeeUsing HOT Water Select CUP ButtonHeating and Frothing Milk Ready Heating Steam Ready 60 SEC Close TAPCleaning the Dual Frother Plus Clearyl Water Filter CartridgeHEATING. Ready 16a. Installing & Activating the Clearyl Water CartridgeYou must activate the cartridge as follows Filter RinsingAdjusting the Water Hardness Programming18a. Aroma 18b. Temperature18c. Setting the Time and Unit on 18d. Auto SHUT-OFFCare and Maintenance 20b. Cleaning with Special Tablet 19e. General Cleaning InstructionsAutomatic Cleaning Cycles 20a. Rinsing 19d. Stones and Beans20c. Decalcifying Procedure Empty TraySupplies and Accessories Tips for Better Coffee Height adjustable coffee-spoutFill Water Troubleshooting All supplies are available throughDrawer DOESN’T Pull OUT or Display Shows Malfunction Limited WarrantyGrinder Makes AN Extremely Loud Noise no Beans are Ground Other limitations and exclusions

Impressa F7 specifications

The Capresso Impressa F7 is a remarkable automatic espresso machine that has transformed the way coffee enthusiasts prepare their favorite brews at home. Designed for both novices and connoisseurs alike, the Impressa F7 boasts a combination of advanced technology, intuitive features, and stylish design, making it a standout choice for anyone passionate about coffee.

One of the main features of the Impressa F7 is its user-friendly interface, which includes a color display screen that allows users to easily navigate through various drink options. With the touch of a button, users can select from a variety of coffee styles, including espresso, cappuccino, and latte. The machine also offers customizable settings, enabling users to adjust the strength, temperature, and volume of their beverages according to personal preferences.

The Impressa F7 is equipped with a high-performance stainless steel conical burr grinder that ensures precise grinding of coffee beans for optimal flavor extraction. This integrated grinder comes with an adjustable grind size setting, allowing users to choose the coarseness of their coffee grounds, which is essential for different brewing methods. Additionally, the machine features a large bean hopper that can hold a substantial amount of coffee beans, reducing the need for frequent refills.

Another standout technology in the Impressa F7 is its advanced brewing system, known as the "Intelligent Pre-Brew Aroma System." This technology pre-soaks the coffee grounds before the brewing process begins, allowing for enhanced extraction and a richer flavor profile. The machine also comes with a built-in milk frother that produces creamy, textured milk for lattes and cappuccinos, making it a versatile choice for milk-based beverages.

In terms of characteristics, the Capresso Impressa F7 shines with its sleek, compact design that fits seamlessly into any kitchen decor. The high-quality materials used in its construction ensure durability and longevity, while the easy-to-clean components make maintenance a breeze. The automatic rinse and cleaning cycle adds convenience, ensuring that the machine remains in optimal condition with minimal effort.

Overall, the Capresso Impressa F7 is a premium espresso machine that combines sophisticated technology with ease of use. Its range of features, from customizable drink options to advanced brewing systems, positions it as an essential addition to any coffee lover's kitchen. Whether you are looking to enjoy a simple shot of espresso or a frothy cappuccino, the Impressa F7 delivers consistently exceptional results, making every coffee experience a delight.
Top Page Image Contents