Capresso Avantgarde Series Temperature / Temp, Select Product, Hot Water Volume / Water Portion

•Push the Dial. The display shows SELECT PRODUCT.

•Push for example the 2-cup espresso button. Turn the dial and select 3 OZ.

•Push the dial to confirm. The 3-tone melody confirms the new setting. From now on, the 2-cup espresso button will produce a total of 6 oz. of coffee. WATER QUANTITY. To select another coffee button, push the Dial again and repeat the steps above. Or you can turn the Dial to EXIT.

•Push the Dial to get back to SELECT PRODUCT.

16.3 TEMPERATURE / TEMP

You can program all five coffee buttons individually to brew at temperature NORMAL or HIGH. In HIGH the coffee is approx. 7º F higher than in NORMAL.

Please note: The temperature is also influenced by the resist- ance of the coffee. Finer ground coffee and more coffee in the brewing chamber will result in more resistance, increasing the temperature of your coffee. Also, the first cup of coffee is always slightly less hot than subsequent coffees.

SELECT PRODUCT

•Push and hold the Dial. FILTER

•Turn the Dial until the display shows TEMP.

•Push the Dial. The Display shows SELECT PRODUCT.

•Push for example the 1-cup coffee button. HIGH.

•Turn the dial and select NORMAL.

•Push the dial to confirm. The 3-tone melody confirms the new setting. From now on, the 1-cup coffee button will use the NORMAL temperature setting. TEMP. To select another coffee button, push the dial again and repeat the steps above.

Or you can turn the Dial to EXIT.

• Push the Dial to get back to SELECT PRODUCT.

16.4 HOT WATER VOLUME / WATER PORTION

You can program the hot water spout to dispense between 1 and 15 oz. of water and then stop. This is useful if you use the hot water spout to make an 8 oz. cup of tea.

Please note: when using the hot water function, you can always stop the flow of hot water simply by turning the hot water dial back to the coffee position.

SELECT PRODUCT

•Push and hold the Dial. FILTER

•Turn the Dial until the display shows WATER PORTION.

•Push the Dial. The Display shows PORTION 5.0 OZ.

•Turn the dial to change the hot water volume from 1 to 15 oz.

•Push the dial to confirm. The 3-tone melody confirms the new setting. WATER PORTION.

•Turn the Dial to EXIT.

•Push the Dial to get back to SELECT PRODUCT.

16.5 STEAM DURATION / STEAM PORTION

When using the frothXpress Plus system, you can set the amount of hot steamed or frothed milk to a certain volume by using the Steam Portion button (Fig. 3,K). By selecting a certain steaming time the machine will always siphon, steam and froth the same amount of milk and then stop automatically. You can set the steam time between 3 and 120 seconds.

Please note: you can always stop the steam action by simply pushing either steam button. Push either steam button again and steaming will continue.

SELECT PRODUCT

22.