Install the receiver | Clarion SIRCR specification

Sirius_Shuttle_Vehicle_Installation.book Page 10 Friday, March 12, 2004 4:56 PM

10	Vehicle Installation Guide

3.Unscrew the star nut and ball strut assembly from the mounting base threaded socket.

4.Remove the screw, lockwasher and flatwasher from the end of the ball strut.

5.Insert the end of the ball strut into the keyed opening on the cradle mounting plate.

6.Secure the plate to the ball strut using the flatwasher, lockwasher and screw.

7.Reattach the mounting plate assembly to the rear or bottom of the cradle assembly, using the two flat-head screws you previously removed.

Using other manufacturer’s mounts

You may install the cradle using other mounts. The mounting plates on the rear and bottom of the cradle provide multiple mounting options using various vehicle-specific aftermarket brackets, such as those you may purchase separately from your local dealer.

5.Install the receiver

1.Place the Plug and Play receiver in the cradle so that the connectors are lined up.

Front of receiver

Front of cradle

Guides

Bottom of receiver

This connector fits in this receptacle

Plug and Play receiver and cradle connectors

Using the guides, gently slide the Plug and Play receiver to engage the connectors and lock into place.