Sirius_Shuttle_Vehicle_Installation.book Page 11 Friday, March 12, 2004 4:56 PM
SIRCR | 11 |
You may adjust the orientation of the cradle by loosening the star nut and tightening it when the cradle is in the desired viewing position.
6. Removing the receiver
When it’s time to take the Plug and Play receiver with you, press the release button to remove it from the cradle and slide the receiver upwards.
Front of cradle
Release button
Plug and Play release button
7. Mount the antenna
Your goal is to place the antenna on a relatively flat surface on the exterior of the vehicle, preferably on the roof (the high point) or on the trunk, if the car is a convertible.
Determine the best position
1.Plug the antenna into the connector on the side of the cradle.
Left side
of cradle 
Antenna
Power
Antenna and power connectors