Creda CRC65, CRC90 manual Recirculation, Extraction, Ducting Fitting

Page 7

Installing your Cooker Hood

RECIRCULATION:

The chimney hood is supplied specified for installation in the extraction mode. To convert to recirculation it will be necessary to obtain the optional pack of two carbon filters.

In the recirculation mode, contaminated air enters the chimney hood and passes through the grease filters and carbon filters and then out into the kitchen through two grilles, at either side of the lower chimney.

To convert the chimney hood to recirculation proceed as follows:

1.To fit the carbon filters, open the metal grease filters. Place one filter over the inlet grille at either end of the fan housing and twist into position (Fig.2).

Fig.2

2.Fit the recirculation spigot over the round outlet on top of the canopy, whilst pressing down on the spigot (Fig.3).

EXTRACTION:

Ducting Fitting:

The chimney hood can be ducted to the out- side, using either rigid or flexible ducting of 100mm, 120mm or 150mm. the choice of ducting is left to the discretion of the installer, however, the best performance will be obtained by using 150mm of rigid ducting. Where flexible ducting is fitted it should not be turned through very tight bends as this could impair the performance of the hood. The ducting must be manufactured from fire retardant material conforming to the relevant British Standard or DIN 4102-B1.

Where the 125mm ducting is used, it will be necessary to install the reduction flange and 125 ÷ 125mm ducting collar over the air out- let in the top of the canopy (Fig.4).

Fig.4

The installer should provide suitable ducting and sealing tape for the installation.

The (optional) carbon filter is not required when the hood is installed in the ducting mode.

Fig.3

NOTE: The two venting grilles must not be fitted into the chimney stack until the chimney stack has been installed onto the wall above the canopy.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Cooker Hood Electrical Requirements Your new Cooker HoodRetention of the Instruction Book ContentsMIN MAX Get to know your Cooker HoodThermal CUT-OUT Installing your Cooker HoodFixing the Canopy Hood Wall FixingsLower Fixings Upper Fixing BracketExtraction RecirculationDucting Fitting Fitting the Chimney Stack DON’T Operating your Cooker HoodNever Carbon Filter 2 pieces Recirculation Model only Filters and their replacementCaring for your Cooker Hood Metal Grease FiltersHow to replace the light CleaningTroubleshooting Page Page Page Key Contacts

CRC65, CRC90 specifications

The Creda CRC90 and CRC65 are two advanced electric range cookers designed to enhance culinary experiences in the modern kitchen. Both models showcase a harmonious blend of functionality, style, and user-friendly technology, appealing to both seasoned chefs and home cooks alike.

The Creda CRC90 stands out with its generous 90 cm width, providing ample cooking space. It features a large capacity oven, which makes it perfect for family meals and entertaining guests. With multiple cooking functions, including conventional, fan-assisted, and grilling, the CRC90 offers versatility for a variety of dishes. The inclusion of a second oven in this model allows for simultaneous cooking at different temperatures, significantly increasing efficiency.

On the other hand, the CRC65 is a more compact 65 cm cooker, ideal for smaller kitchens without sacrificing performance. It still delivers excellent cooking capabilities, featuring similar functions as its larger counterpart. The CRC65 is equipped with a single oven and a separate grill, making it versatile for day-to-day cooking needs.

Both models boast a sleek and modern design that fits seamlessly into any kitchen decor. They are available in various colors, allowing homeowners to choose a style that complements their space. The easy-to-clean enamel interior is a practical feature, ensuring that maintenance is minimal, while the double-glazed doors keep heat contained for energy efficiency.

In terms of technology, both the CRC90 and CRC65 are equipped with intuitive touch controls that simplify operation. The digital timer and programmable settings enable users to cook meals with precision and convenience. Notably, the halogen hob on both cookers provides rapid heat-up times and allows for precise temperature adjustments, ensuring that cooking is efficient and effective.

Safety is paramount in the design of the Creda cookers. Both models include features such as flame supervision devices and adjustable legs to accommodate uneven floors, ensuring they are safe and stable in any kitchen environment.

In summary, the Creda CRC90 and CRC65 are exceptional electric range cookers that bring both style and functionality to the kitchen. Their impressive features, advanced technologies, and thoughtful design make them ideal choices for anyone looking to elevate their cooking experience. Whether you need the expansive capabilities of the CRC90 or the compact efficiency of the CRC65, Creda delivers a reliable solution for all culinary needs.
Top Page Image Contents