Best U102E manual Install the Hood

Page 9

INSTALL THE HOOD

NOTE: At least three people will be required to mount the hood.

1.Raise the hood up into the wall cabinet. Adjust brackets to contact inside walls of the cabinet.

2.Make sure the front edge of the hood drawer support is aligned with the front of the wall cabinet. Center the hood on the wall cabinet.

3.Tighten the (4) mounting bracket machine screws previously installed.

4.Fasten the hood to the cabinet with (8) 4.2 x 15mm pan head screws.

Make sure that screws will not penetrate finished cabinet side walls.

5.Open the slide out drawer. Place the glass panel into the open recessed area of the drawer.

6.Slide glass left or right until it is centered in the opening and securely retained.

- 9 -

Image 9

Contents Model U102E Intended for Domestic Cooking only ! Warning Read and Save These InstructionsPage Operation ControlsLED Display Halogen Bulbs Fuse Replacement Maintenance Hood Cleaning Grease Filters Prepare the Hood Wall Spacer Prepare Wall CabinetInstall the Hood Install the Ductwork Exterior or IN-LINE Blower SelectionExterior Blower IN-LINE Blower Power connection at hood WiringPower Connection AT Hood Exterior or In-line blower connectionInstall Filters WarrantyGrease Filter Service Parts Description Avertissement Lisez ET Conservez CES InstructionsPage Commandes Fonctionnement’Indicateur DEL Ampoules Halogenes Remplacement DU FusibleEntretien Filtres à graisseNettoyage de la hotte Préparation DE LA Hotte Cale Préparation DE L’ARMOIREInstallation DE LA Hotte Choix DE Ventilateur Externe OU IN-LINE Pose DU ConduitVentilateur Exterieur Ventilateur IN-LINE Connexion du ventilateur extérieur ou Installation ElectriqueConnexion de l’alimentation de la hotte Connexion DU Ventilateur LA HotteInstallation DES Filtres GarantieFiltres À Graisse Pieces DE Rechange De Pièce Advertencia LEA Y Conserve Estas InstruccionesAdvertencia Operación ControlesLa pantalla LED Bombillas DE Halógeno Reemplazo DEL FusiblePrecaución La bombilla puede estar caliente Mantenimiento Filtros de grasaLimpieza de la campana Preparación DE LA Campana Prepare EL Gabinete DE LA Pared Tornillos DESeparador DE Pared Instalación DE LA Campana Selección DEL Ventilador Exterior O DEL Ventilador IN-LINE Instalación DEL Sistema DE ConductosVentilador Exterior Ventilador IN-LINE Conexión del ventilador exterior o In- Line CableadoConexión de energía eléctrica en la campana Conexión DEL Ventilador EN LA CampanaInstalación DE Filtros GarantíaFiltro DE Grasa Piezas DE Repuesto Clave N Pieza N Descripción 04307336/1N