TOA Electronics WD-4800 instruction manual Operation, Rack Mounting, Specifications

6. OPERATION

Step 1. Turn on the power of both the WD-4800 and connected tuners (the power lamp lights). Step 2. Set the wireless microphone switch to the ON position.

7. RACK MOUNTING

Use an optional MB-15B bracket when mounting the unit in an equipment rack.

Step 1. Remove rubber feet on the unit's bottom surface.

Step 2. Using the screws supplied with the MB-15B, mount the MB-15B to the unit's sides.

Mounting bracket MB-15B (optional)

3 x 14 screw (supplied with MB-15B)

Step 3. Using other screws also supplied with the MB-15B, mount the unit in the rack.

Rack

M5 fiber washer (supplied with MB-15B)

M5 x 12 screw (supplied with MB-15B)

8. SPECIFICATIONS

Power Source	AC mains (120 V/230 V selectable)
Power Consumption	25 W
Frequency Range	VHF/UHF
Distribution Channel	2 channels
Antenna Input	2 inputs (front x 1, rear x 1), 75 Ω , BNC (phantom powering of 9 V DC/25 mA for antenna)
Antenna Output	4 outputs, 75 Ω , BNC
DC Power Supply	4 outputs (Each output: 13 V DC/250 mA)
Indicator	Power lamp
Operating Temperature	–10 to +50°C
Finish	Front panel: Al coating, black
	Case:	Pre-coated steel plate, black
Dimensions	420 (w) x 44 (h) x 305.5 (d) mm
Weight	3.55 kg

Note: The design and specifications are subject to change without notice for improvement.

• Accessories
DC cable	4
• Optional Product
Rack mounting bracket MB-15B

Printed in Taiwan 133-07-186-5B