(GB) READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE.
These instructions are valid only for those countries which are indicated by their identification symbol on the front cover of the instruction booklet and on the label on the appliance.
The manufacturer cannot be held responsible for any damage to things or persons caused by an incorrect installation or by incorrect use of the appliance.
The manufacturer cannot be held responsible for any inaccuracies due to errors in printing or writing contained in this booklet. The appearance of the figures shown is also only approximate.
The manufacturer reserves the right to make changes to his products when it is considered necessary and useful without effecting the essential features regarding safety and function.
INDEX:
TECHNICAL MANUAL FOR THE INSTALLER | pag. 2 |
Inserting the hob | pag. 2 |
Fixing the hob – Advice about installation | pag. 2 |
Ventilation and airing of the premises – Connection to the gas supply | pag. 3 |
Adaptation to different types of gas | pag. 3 |
Regulation of the burners | pag. 3 |
Connection to the electricity supply | pag. 4 |
MAINTENANCE OF THE APPLIANCE – Replacing parts | pag. 4 |
USE AND MAINTENANCE MANUAL | pag. 4 |
Description of types of hobs | pag. 4 |
Use of the burners | pag. 5 |
Cleaning of the appliance | pag. 5 |
Figures | pag. 12 |
Electrical Diagran | pag. 13 |
THIS APPLIANCE HAS BEEN DESIGNED FOR NON PROFESSIONAL USE IN HOUSEHOLDS.
This appliance is not intended for use by persons (including children) with reduced mental or motorial capacities or who have no experience and knowledge unless under supervision or instructed on use of the appliance by a person responsible for their safety. Children must be watched to ensure that they do not play with the appliance.
The appliance is not constructed to operate with an external timer or other remote control system
TECHNICAL MANUAL FOR THE INSTALLER
INFORMATION FOR THE INSTALLER
The installation, all regulations, changes and maintenance referred to in this part must only be carried out by qualified staff. A wrong installation can cause damage to persons, animals or things which the manufacturer cannot be held responsible for. The safety and automatic regulation devices on the appliances can only ever be changed by the manufacturer or by the supplier which has been authorised to do so.
INSERTING THE HOB
When you have removed the various adjustable parts from their internal and external packaging, check that the hob is intact. If you are in doubt do not use the appliance and contact the qualified staff.
The parts which make up the packaging ( polystyrene, bags, boxes, nails etc. ), are dangerous objects and must be kept out of children’s reach.
Taking into consideration the specific dimensions of the appliance (see table N°1), make an opening in the work surface (see figure): ∙ Hobs type P61/P61V (59x50 cm) P91/P91V (86x50 cm) with right angle corner Fig. 1.
using the measurements indicated in table N°.1
The appliance must be classified in class 3 and thus it is subject to all the regulations indicated by the norms regarding these appliances.
Table N°.1 |
|
|
|
|
|
| W (cm) | D (cm) |
P6 | 57 | 48 |
P9 | 84 | 48 |
L1 min (cm) | 6 |
L2 min (cm) | 4 |
L3 min (cm) | 10 |
L4 min (cm) | 70 |
FIXING THE HOB
In order to prevent liquids from accidentally leaking into the kitchen unit underneath the appliance is equipped with a special seal. To put on this seal follow the instructions below very carefully.
1)Stretch out the seal along the edge of the opening, taking care to overlap the joining points. (fig. 2).
2)Insert the hob into the opening in the kitchen unit.
3)With a screwdriver assemble the 4 plates A with the special screw B (fig. 3).
4)Move the plates along and fix them using screw B.
5)Reinsert the part of the seal on the outside of the hob.
2