Install the Blower, USE and Care, Roof Installations

INSTALL THE BLOWER

ROOF INSTALLATIONS

INSTALL THE BLOWER

WALL INSTALLATIONS

1.Remove roofing nails from the upper 2/3 of the shingles around the cutout area and carefully lift the shingles to allow the back flashing sheet on the blower hous- ing to fit under them.

2.Center the blower ring in the 11" diam- eter hole, making sure that the 1-1/4" diameter electrical wiring hole aligns with the hole in the wiring box.

3.Attach the blower to the roof with the six screws provided. All six holes in the back panel must be filled, or any moisture that may get inside the housing could leak into the house.

4.Using a good grade of roofing cement, seal all of the shingles around the hous- ing and flashing sheet as well as the mounting screw heads.

5.Bring electrical wiring (from hood) through the hole in the wiring box and secure it according to local codes.

Figure 4
BLACK
TO
BLACK
BLACK
TO
BLACK
120 VAC	WHITE	GREENN
LINE IN	TO	GREENN
	WHITE	TO
120 VAC	TO	GREEN
120 VAC	WHITE	TO
WIRING	WHITE	GREEN
FROM HOOD

6.Make the electrical connections with the proper connector for the type of wiring being used. Connect white to white, black to black, and the green or bare wire to green. See Figure 4, as well as the wiring label on the hood’s mounting plate.

7.Replace wiring box cover and screws. Do not pinch wiring under the cover.

8.Check for free movement of the damper before installing housing cover and screws.

9.Turn on power and check operation of the blower.

1.Place a large bead of caulk on the back side of the housing along the outer edge.

2.Center the blower ring in the 11" diam- eter hole, making sure that the 1-1/4" diameter electrical wiring hole aligns with the hole in the wiring box.

3.Attach blower to the wall with the six screws provided. All six holes in the back panel must be filled, or any moisture that may get inside the housing could leak into the house.

4.Using a good grade of caulk, seal all around the mounting screw heads.

5.Bring electrical wiring through the hole in the wiring box and secure it according to local codes.

6.Make the electrical connections with the proper connector for the type of wire being used. Connect white to white, black to black, and green or bare wire to green. See Figure 4.

7.Replace wiring box cover and screws. Do not pinch wiring under cover.

8.Check for free movement of the damper before installing housing cover and screws.

9.Turn on power and check operation of the blower.

10.Top and side flanges of the back plate may be covered with trim strips. Do not block grille opening at bottom with trim. It will adversely affect performance of the blower.

USE AND CARE

Disconnect electrical power supply and lock- out service panel before cleaning or servic- ing this unit.

CLEANING

Remove cover and carefully vacuum blower and inside of housing. Be careful not to bend or otherwise damage blower wheel.

MOTOR LUBRICATION

The motor is permanently lubricated. Do not oil or disassemble motor.

EB6, EB9 specifications

The Best EB9 and EB6 models represent a remarkable leap in the world of electric bikes, designed to cater to the needs of urban commuters and outdoor enthusiasts alike. These models stand out for their blend of performance, technology, and user-friendly features.

The EB9 showcases a robust design with a lightweight aluminum frame, making it both sturdy and easy to maneuver. It is equipped with a powerful 500W motor that delivers impressive torque, enabling riders to effortlessly conquer hills and rough terrains. The bike's maximum speed can reach up to 28 mph, allowing for fast commuting without sacrificing safety. Additionally, the EB9 boasts a long-lasting 48V lithium-ion battery, providing a range of up to 60 miles on a single charge, which is perfect for long-distance trips or extended adventures.

On the other hand, the EB6 is tailored more towards casual riders and those who prefer a smoother ride. It features a 350W motor that offers support up to 20 mph, striking a balance between speed and efficiency. The EB6 comes with an adjustable seat and ergonomic handlebars that enhance comfort during long rides. Its 36V battery is designed for a range of approximately 40 miles, making it suitable for daily commutes and leisurely weekend rides.

Both models incorporate advanced technologies such as pedal assist and throttle mode, providing riders with options based on their preferences. Users can easily switch between different levels of assistance, allowing for a customizable riding experience. Furthermore, both the EB9 and EB6 are equipped with hydraulic disc brakes, ensuring reliable stopping power in any weather condition.

Safety features are also a priority, with integrated lights for visibility and reflectors positioned strategically around the bike. The inclusion of a durable suspension system in both models enhances ride quality, absorbing shocks from uneven paths.

In conclusion, the Best EB9 and EB6 are exceptional electric bikes that cater to a wide range of riders. Their innovative features, combined with advanced technology, make them ideal choices for those seeking efficiency and performance in their daily cycling endeavors. Whether commuting in the city or exploring nature, these bikes provide an outstanding riding experience.