Dishwasher
Place grease filters in the dishwasher. Select most powerful washing programme and highest temperature, at least 65°C. Repeat the process. Refit the grease filters when they are dry. When washing the metal grease filter in the dishwasher a slight discolouration of the filter can occur, this does not have any impact on its performance.
•Clean the inner housing using a hot detergent solution only (never use caustic detergents, abrasive powders or brushes).
Charcoal filter
•The charcoal filter should only be used if you want to use the hood in the recirculation function.
•To do this you will need an original charcoal filter (available from your local Service Force Centre).
•This filter cannot be cleaned or reused.
•As a general rule, the charcoal filter(s) should be changed once every four months.
•Fitting.
Remove the frame pushing the two side release keys "a". Fig.
Fit each charcoal filter so to cover the plastic grid that protect the fan wheel, then turn clockwise the central handle of the charcoal filter. Fig. 6.
Refit the frame (snap into place).
•To remove proceed in the reverse order.
•Always specify the hood model code number and serial number when ordering replacement filters. This information is shown on the rating plate located on the inside of the unit.
•The charcoal filter can be ordered from your local Service Force Centre.
a
a a
b b
Fig. 6
Fig. 5
52