Zephyr ZVE-E36S, ZVE-E30S, ZVE-E42S Installation Mounting Height & Clearance, Minimum Duct Size

Page 7

min.ducted-321/2” minrecirc.-36” max.51”

9-27/32"

min. 28" - max. 36"

* min. 97" ** max. 123"

36"

DUCTING

A minimum of 6" round or 3-1/4 x 10" rectangular duct must be used to maintain maximum air flow efficiency.

Always use rigid type metal ducts only. Flexible ducts could restrict air flow by up to 50%.

Use calculation worksheet to compute total duct work.

ALWAYS, when possible, reduce the number or transitions and turns. If long duct run is required, increase duct size from 6" to 7 or 8". If a reducer is used, install a long reducer instead of a pancake reducer. Reduce duct size as far away from opening as possible.

If turns or transitions are required:

Install as far away from opening and as far apart, between 2, as possible.

Minimum mount height between range top to hood bot- tom should be no less than 28".

Maximum mount height should be no higher than 36".

It is important to install the hood at the proper mounting height. Hoods mounted too low could result in heat damage and fire hazard; while hoods mounted too high will be hard to reach and will loose its performance and efficiency.

If available, also refer range manufacturer'sheight clearance requirements and recommended hood mounting height above range. Always check your local codes for any differences.

*Minimum ceiling height of 97”. Hood mounted at 28” above cooking surface.

**Maximum ceiling height of 123". Hood mounted at 36" above cooking surface.

Minimum Duct Size:

Round- 6" minimum

Rectangular- 3-1/4 x 10” minimum (requires a 6” to 3-1/4 x 10” adapter not supplied)

DAMAGE-SHIPMENT / INSTALLATION:

•Please fully inspect unit for damage before installation.

• If the unit is damaged in shipment , return the unit to the store in which it was bought

for repair or replacement.

 

• If the unit is damaged by the customer

,

repair or replacement is the responsibility

of the customer.

 

• If the unit is damaged by the installer

(if

other than the customer), repair of replace ment must be made by arrangement between customer and installer.

Installation - Mounting Height & Clearance

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Use, Care, and Installation Guide Page Installation Table of ContentsRead and Save These Instructions Important safety NoticeList of Materials Duct pieces Equivalent number Total Installation Ductwork Calculation SheetMinimum Duct Size Installation Mounting Height & ClearanceInstallation Ducting Installation SpecificationsDuct Cover Bracket Hood & Duct CoverDucting InstallationCharcoal Filter Dimensions Ductless RecirculatingFeatures & Controls Touch Controls & Features Re-setting Function IndicatorSetting the Filter Change Reminder Filter Replace IndicatorFilter Clean Reminder Clean IndicatorMetal Filters CleaningSurface Maintenance Metal Filter DimensionsReplacing Light Bulbs Maintenance LightsDoesn’t work? Issue Cause What to doDescription Part# List of Parts and AccessoriesWarranty

ZVE-E42S, ZVE-E36S, ZVE-E30S specifications

The Zephyr ZVE series represents a cutting-edge advancement in the realm of electric bikes, with the ZVE-E36S, ZVE-E42S, and ZVE-E30S models setting new standards in performance, technology, and user experience. Each model is designed to cater to a variety of cycling needs while enhancing comfort and efficiency for riders.

The ZVE-E36S is tailored for urban commuting. Its lightweight frame ensures maneuverability through city traffic, while the powerful 250W motor provides ample assistance for tackling inclines and longer distances. With a 36V lithium-ion battery, riders can enjoy a range of up to 60 miles on a single charge, making it an ideal choice for daily commuters. The bike features a sophisticated pedal-assist system that allows cyclists to adjust their effort, promoting a natural cycling experience without compromising on the thrill of speed.

Next in the lineup, the ZVE-E42S is designed for both urban environments and light off-road adventures. Equipped with a robust 42V battery, this model extends the range to an impressive 75 miles, catering to cyclists who prefer longer excursions. The enhanced motor delivers high torque, ensuring smooth acceleration on varying terrains. Notably, the ZVE-E42S incorporates advanced suspension systems for better shock absorption, making it suitable for bumpy roads and trails. Its ergonomic design and adjustable handlebars provide exceptional comfort, accommodating riders of different heights.

Lastly, the ZVE-E30S focuses on versatility and ease of use. It features a compact design ideal for storage and transport. The 30V battery is perfect for leisure rides and casual commuting, offering a range of approximately 50 miles. This model adopts a user-friendly interface with an intuitive display that provides real-time information on speed, distance, and battery status. Safety is paramount, with integrated LED lights and a responsive braking system ensuring visibility and control, even in low-light conditions.

All three models leverage Zephyr’s commitment to innovation, featuring high-strength aluminum frames for durability and lightweight performance. Smart technology integration allows for app connectivity, enabling riders to track their rides and receive maintenance alerts. In summary, the Zephyr ZVE-E36S, ZVE-E42S, and ZVE-E30S combine distinct characteristics and technologies to create a superior riding experience for cyclists of all levels.
Top Page Image Contents