Waterford Precision Cycles Gas Hob WOK Support, Cleaning, Stainless Steel Surface, Gas Rings

WOK SUPPORT Fig 15

This optional support was designed for concave base pans and are ideal for woks. See Fig 14.

Fig 14

CLEANING

In order to maintain the appearance of this hob, periodical cleaning is recommended. Wipe away any spills when they occur in order to prevent burned on deposits which can be difficult to remove.

A. Stainless Steel Surface

Use hot water and soap or non-chlorate deter- gent, applied with a soft cloth to remove most soiling and polish dry to avoid streaking. For stubborn stains we recognised stainless steel cleaner, such as Waterford Chrome Cleaner (ask you local dealer for more information) or stain- less steel soft wool.

B. Gas Rings

*The hob burner cap and burner flame cap covers (see Fig.15) can be washed with a damp cloth and soapy water.

*The hob burner caps can turn bluish around the burner area due to the heat. Steel wool can be used to decrease this effect.

*Gently wipe clean the electric ignition “E” and thermocouple “T” (see Fig.15) with a dry cloth.

*Replace burner caps and burner flame cap covers taking care not to damage the electric ignition and thermocouple.

*In order to avoid damage to the electric ignition, avoid using the rings when the burner caps and flame cap covers are not in place.

8