Waterford Precision Cycles Gas Hob manual HOB Operation, Using The Rings, Using The Dual Burner

Page 8

When fitting an extraction hood over the appliance ensure that there is a permanent air vent to the room that allows adequate ventilation for both the hob and the hood.

If the extraction hood is installed above the hob, a minimum distance of 750mm must be maintained between the top surface of the appliance and the bottom surface of the hood. See Fig.11

Fig. 11

HOB OPERATION

Using The Rings

Press the corresponding gas ring knob (refer to control panel layout) and turn it to the maximum setting. The burner will spark and ignite. Keep the knob pressed in for approximately 15 seconds, if the burner fails to ignite or it extinguishes wait at least 1 minute before repeating the lighting proce- dure. Once the burner has remained lighting, the control knob can be adjusted to the required setting (see Fig.12)

Fig. 12

Valve closed, no gas flow.

Maximum capacity, maximum gas flow.

Minimum capacity, minimum gas flow.

Using The Dual Burner

The dual burner is controlled by two gas ring knobs (refer to the control panel layout). The inner ring knob allows for the burner to be used as an auxil- iary burner which is suitable for pot diameters rang- ing from 60-140mm. By turning on both the inner and outer ring knobs, the burner is used with pot diameters ranging from 240-260mm. The dual burner ring knobs are operated as outlined in the “Using The Rings” section.

CHOOSING THE RIGHT BURNER

The symbol printed to the left of each knob indi- cates the corresponding burner. (see diagram of control panel on page 4). Choosing the most appropriate burner depends on the pan diameter. See table below:

For best efficiency it is important that the right burn- er is chosen for each pan.

PAN DIAMETER

BURNER

MINIMUM

MAXIMUM

 

DIAMETER

DIAMETER

 

 

 

Auxiliary

60mm

140mm

 

(with reduction)

 

 

 

 

Semi Rapid

160mm

200mm

 

 

 

Rapid

200mm

240mm

 

 

 

Dual

240mm

260mm

 

 

 

ADDITIONAL PAN SUPPORTS

Support reduction for pans:

This support should only be used with the auxiliary burner and is used for pans with a diameter of 60mm to prevent tipping. See Fig.13.

Fig. 13

7

Image 8
Contents 90cm GAS HOB Table of Contents Introduction Safety Instructions Technical Information Product FeaturesControl Panels Positioning & Fitting The Hob Installation InstructionsPre-Installation GAS Connection Converting for LPG USEElectrical Connection VentilationUsing The Rings Using The Dual BurnerHOB Operation Choosing the Right BurnerCleaning WOK SupportStainless Steel Surface Gas RingsTrouble Shooting Problem Cause ActionWarranty Manufactured by

Gas Hob specifications

Waterford Precision Cycles has earned a stellar reputation in the cycling community for its beautifully crafted bicycles that combine artisan craftsmanship with modern technology. Among its standout products is the Waterford Precision Cycles Gas Hob, which exemplifies the brand's dedication to performance, comfort, and adaptability.

One of the main features of the Gas Hob is its unique frame design. Constructed from high-quality steel, the frame offers exceptional strength and durability, ensuring that the bicycle can withstand the rigors of both urban commuting and off-road adventures. The steel material also provides a natural shock-absorption capability, delivering a comfortable ride even on rough terrains.

Incorporating advanced geometry, the Gas Hob boasts an optimal balance between performance and comfort. The design allows for a more relaxed riding position, reducing fatigue on longer rides while ensuring efficient power transfer. The bike is equipped with a selection of experienced components, including a premium drivetrain that offers smooth and precise shifting. Riders can choose from various gearing options, making it ideal for both hill climbing and flat trail cruising.

Technology plays an integral role in the Gas Hob's appeal. The bike utilizes cutting-edge hydraulic disc brakes, providing superior stopping power in all weather conditions. This feature enhances safety, allowing riders to feel confident in their ability to stop quickly when necessary. Additionally, the Gas Hob can be outfitted with tubeless-ready wheels, reducing the risk of flats and improving overall performance.

A key characteristic of the Waterford Precision Cycles Gas Hob is its customization options, allowing cyclists to personalize their bike to fit their unique style and needs. Whether choosing the color scheme, components, or accessories, riders can make the Gas Hob truly their own.

Lastly, the Gas Hob's attention to detail is evident in its finishing touches. From the precision welding to the thoughtful integration of storage solutions, every aspect of the bike reflects Waterford's commitment to quality. This bicycle not only performs exceptionally well but also embodies the artistry that defines Waterford Precision Cycles. Whether you’re a seasoned cyclist or just beginning your journey, the Gas Hob undoubtedly stands out as a dependable and stylish choice for all riding conditions.