Wolf Appliance Company 811504 Pro Wall Hood Installation Low-Profile Wall Hoods, Wall Preparation

Page 12

Pro Wall Hood Installation

12

 

 

Low-Profile Wall Hoods

WALL PREPARATION

Construct the wall framing as shown in the illustration below. Be sure to locate horizontal framing using the desired installation height of the hood. Refer to the illustration below for the location of mounting holes for low-profile wall hoods.

Framing must be tied together and to ceiling joists to provide enough structural strength to support the weight of the hood and internal blower, if applicable.

WIDTH OF HOOD

 

261/4" (667) TO

 

FRAMING STUD CENTERS

 

131/8"

FRAMING

(333)

STUDS

81/4"

 

(210) TO

 

CENTER

 

OF STUD

 

HOOD PREPARATION

IMPORTANT NOTE: For low-profile wall hoods using the 500 CFM internal blower, refer to installation instructions provided with the blower assembly. Install the internal blower prior to mounting the hood.

If a duct cover is to be used, follow the instructions on page 9 before installing the hood. If you are installing a recirculating kit, refer to instructions included with the kit before installing the hood.

Remove the filters by pushing each filter up at the angle it is placed in, and rotate down. Refer to the illustration below. Remove the center filter first. Gloves should be worn when handling filters.

If you are using an in-line or remote blower, attach the optional 10" (254) round transition or custom piece to the top of the wall hood using holes provided.

If you are installing an in-line or remote blower, drill a

7/8" (22) hole through the wood framing for the conduit. Refer to the illustration below for location of the hoods’ electrical box. Refer to the in-line and remote blower sections on pages 20–21 and follow installation instructions provided with the blower.

IMPORTANT NOTE: Do not run electrical wiring for an in-line or remote blower through the ductwork.

HOOD CENTERLINE

Wall framing for low-profile hood.

 

FILTER

GREASE CUP

SIDE VIEW

ELECTRICAL BOX

Filter removal.

Location of electrical box.

Image 12
Contents Pro Wall Ventilation Hoods Contents Important NoteWolf Pro Wall Ventilation Hoods Pro Wall Hood Installation Installation Considerations Blower AssembliesPro Wall Hood Specifications Overall Dimensions LOW-PROFILE Wall Hoods24 610 Deep Wall Hoods 27 686 Deep Wall HoodsPro Wall Hood Specifications Installation Specifications 27 Deep Wall HoodsPro Wall Hood Specifications Electrical Requirements Installation OptionsPro Wall Hood Specifications Discharge Specifications LOW-PROFILE Wall Hoods Discharge OptionsDuct Cover Installation Duct CoverPro Wall Hood Installation Install Ductwork LOW-PROFILE Wall Hoods 27 Deep Wall Hoods Pro Wall Hood Installation Low-Profile Wall Hoods Wall PreparationHood Preparation Hood Installation Pro Wall Hood Installation 27 Deep Wall Hoods Wood Mounting SupportBack plate and transition Location of electrical box Reattach Back Plate Pro Wall Hood Installation All Pro Wall Hoods Wiring ConnectionsFilter Installation Pro Wall Hood Installation Wolf Nameplate Blower Assemblies Pro Wall Hood Installation Internal Blowers Blower INSTALLATION-24 and 27 Wall HoodsPro Wall Hood Installation In-Line and Remote Blowers IN-LINE and Remote Blower DimensionsBlower Installation Service Information Troubleshooting Page 800.332.9513

811504, Pro Wall specifications

The Wolf Appliance Company Pro Wall, model 811504, represents a pinnacle of culinary technology and design. This professional-grade appliance is a cornerstone for both home chefs and culinary enthusiasts who demand precision, performance, and style in their cooking environment. With its striking aesthetics and superior functionality, the 811504 Pro Wall seamlessly integrates into modern kitchens while delivering exceptional cooking results.

One of the main features of the Wolf 811504 is its powerful cooking capabilities. This wall oven offers impressive temperature accuracy and consistency, ensuring that every dish is cooked to perfection. With a high-performance dual convection system, the oven circulates heated air for even cooking and browning. This cutting-edge technology is particularly beneficial for baking, roasts, and casseroles, allowing for professional-quality results at home.

The 811504 also showcases a user-friendly interface that makes cooking straightforward and intuitive. Its advanced control panel features multiple cooking modes, including traditional bake, roast, convection bake, and more. Additionally, the appliance is equipped with customizable settings, allowing users to adjust the temperature and time with precision. An integrated meat probe is yet another highlight, enabling chefs to monitor internal temperatures accurately, ensuring meats are cooked precisely to their desired doneness.

In terms of design, the Wolf Pro Wall 811504 emphasizes both durability and elegance. The exterior is crafted from stainless steel, which not only enhances its modern appeal but also ensures resilience against the rigors of daily use. The oven’s spacious interior features multiple racks, allowing users to cook multiple dishes simultaneously. This is particularly advantageous for hosting gatherings or preparing large meals.

Moreover, the oven's self-cleaning feature saves users time and effort while maintaining hygiene. The advanced sealing technology prevents heat from escaping, maximizing energy efficiency and reducing cooking time.

In conclusion, the Wolf Appliance Company Pro Wall, model 811504, is an embodiment of quality and sophistication in the kitchen. Its main features, including dual convection technology, intuitive controls, and durable design, make it an indispensable tool for anyone serious about cooking. The 811504 not only enhances the cooking experience but also elevates the aesthetic of any kitchen, truly making it a worthy investment for culinary enthusiasts.