Wolf Appliance Company 811504 manual Pro Wall Hood Installation 27 Deep Wall Hoods

Page 14

Pro Wall Hood Installation

14

 

 

24" and 27" Deep Wall Hoods

WALL PREPARATION

Construct the wood wall framing flush with the wall studs and centered in the location that the hood will be mounted. Finish the wall surface.

Attach the wood mounting support provided with the hood. Refer to the illustration below. The mounting support should be centered within the desired location of the hood. Use the 3" (76) screws provided to attach the mounting support to the wall. The screws should be located to correspond with wall framing and countersunk so that they are below flush.

Install the retaining brackets to the wood mounting support at the locations shown in the illustration and the chart below. Use the #10 X 11/2" (38) screws and washers provided to secure the brackets in place. The brackets should be mounted 1/2" (13) above the top of the wood mounting support.

For ease of installation, the location of the wood mounting support and retaining bracket allow for 1/2" (13) clearance at the top of the hood. This gap will be taken up during final mounting of the hood to the mounting support.

Refer to the illustration below for the location of mounting holes for pro 24" (610) and 27" (686) deep wall hoods, one on each side of the back plate.

Framing must be tied together and to ceiling joists to provide enough structural strength to support the weight of the hood and internal blower, if applicable.

Wood Mounting Support

WIDTH OF HOOD

A

30" (762)

113/4" (298)

36" (914)

121/4" (311)

42" (1067)*

151/4" (387)

48" (1219)*

181/4" (464)

54" (1372)*

211/4" (540)

60" (1524)*

241/4" (616)

66" (1676)*

271/4" (692)

 

 

 

RETAINING

 

BRACKET

 

1/2" (13)

151/8"

 

(384)

 

TO BOTTOM

A

OF HOOD

CENTER

OF HOOD

21/2"

(64)

MOUNTING

HOLE

47/16"

(113)

Wood mounting support.

Location of mounting holes.

Image 14
Contents Pro Wall Ventilation Hoods Contents Important NoteWolf Pro Wall Ventilation Hoods Pro Wall Hood Installation Installation Considerations Blower Assemblies24 610 Deep Wall Hoods Pro Wall Hood Specifications Overall DimensionsLOW-PROFILE Wall Hoods 27 686 Deep Wall HoodsPro Wall Hood Specifications Installation Specifications 27 Deep Wall HoodsPro Wall Hood Specifications Electrical Requirements Installation OptionsPro Wall Hood Specifications Discharge Specifications LOW-PROFILE Wall Hoods Discharge OptionsDuct Cover Installation Duct CoverPro Wall Hood Installation Install Ductwork LOW-PROFILE Wall Hoods 27 Deep Wall Hoods Hood Preparation Pro Wall Hood Installation Low-Profile Wall HoodsWall Preparation Hood Installation Pro Wall Hood Installation 27 Deep Wall Hoods Wood Mounting SupportBack plate and transition Location of electrical box Reattach Back Plate Filter Installation Pro Wall Hood Installation All Pro Wall HoodsWiring Connections Pro Wall Hood Installation Wolf Nameplate Blower Assemblies Pro Wall Hood Installation Internal Blowers Blower INSTALLATION-24 and 27 Wall HoodsPro Wall Hood Installation In-Line and Remote Blowers IN-LINE and Remote Blower DimensionsBlower Installation Service Information Troubleshooting Page 800.332.9513

811504, Pro Wall specifications

The Wolf Appliance Company Pro Wall, model 811504, represents a pinnacle of culinary technology and design. This professional-grade appliance is a cornerstone for both home chefs and culinary enthusiasts who demand precision, performance, and style in their cooking environment. With its striking aesthetics and superior functionality, the 811504 Pro Wall seamlessly integrates into modern kitchens while delivering exceptional cooking results.

One of the main features of the Wolf 811504 is its powerful cooking capabilities. This wall oven offers impressive temperature accuracy and consistency, ensuring that every dish is cooked to perfection. With a high-performance dual convection system, the oven circulates heated air for even cooking and browning. This cutting-edge technology is particularly beneficial for baking, roasts, and casseroles, allowing for professional-quality results at home.

The 811504 also showcases a user-friendly interface that makes cooking straightforward and intuitive. Its advanced control panel features multiple cooking modes, including traditional bake, roast, convection bake, and more. Additionally, the appliance is equipped with customizable settings, allowing users to adjust the temperature and time with precision. An integrated meat probe is yet another highlight, enabling chefs to monitor internal temperatures accurately, ensuring meats are cooked precisely to their desired doneness.

In terms of design, the Wolf Pro Wall 811504 emphasizes both durability and elegance. The exterior is crafted from stainless steel, which not only enhances its modern appeal but also ensures resilience against the rigors of daily use. The oven’s spacious interior features multiple racks, allowing users to cook multiple dishes simultaneously. This is particularly advantageous for hosting gatherings or preparing large meals.

Moreover, the oven's self-cleaning feature saves users time and effort while maintaining hygiene. The advanced sealing technology prevents heat from escaping, maximizing energy efficiency and reducing cooking time.

In conclusion, the Wolf Appliance Company Pro Wall, model 811504, is an embodiment of quality and sophistication in the kitchen. Its main features, including dual convection technology, intuitive controls, and durable design, make it an indispensable tool for anyone serious about cooking. The 811504 not only enhances the cooking experience but also elevates the aesthetic of any kitchen, truly making it a worthy investment for culinary enthusiasts.