Wolf Appliance Company PL342212 dimensions L F B L O W E R a S S E M B L I E S

Planning Information

Pro Ventilation Hood Liner

M O D E L P L 3 4 2 2 1 2

W O L F B L O W E R A S S E M B L I E S

A ventilation system must include a blower assembly. Wolf ventilation hood liners are shipped without the blower assembly. An internal, in-line or remote blower assembly must be selected to accommodate the cooking appli- ance, CFM requirements and homeowner prefer- ences. Internal, in-line and remote blower assem- blies are available as sales accessories through your Wolf dealer.

IMPORTANT NOTE: Use only a Wolf blower with all Wolf ventilation products.

		247/8"
		(632)
18"	12"
(457)
	(305)
		8"
		(203)
	22"	18"
	(559)	(457)

Internal blowers are mounted inside the hood liner canopy. In-line blowers are mounted in between the hood liner and the exterior of the home. Remote blowers can be mounted on the roof or in some cases, on an exterior wall. Refer to the illustrations below for dimensions of Wolf in-line and remote blowers.

Pro ventilation recommendation charts on the following page provide minimum CFM recom- mendations according to the cooking appliance and hood liner used and blower options for each specific Pro hood liner.

In-line BLOWER-110IL

		203/4"
281/4"		(527)
(718)	10" (254)
	Diameter
151/2"		241/2"
(394)
		(622)
	14"
	(356)
	243/4"	43/4"
		(121)
	(629)

Remote BLOWER-90REM

	18" (457)
	10"
291/2"	(254)
(749)
10" (254)
Diameter
143/4"	1
(375)	29 /2"
	(749)
101/8"
(257)
22"	71/4"
(559)	(184)

Remote BLOWER-120REM

	21" (533)
	10"
291/2"	(254)
(749)
10" (254)
Diameter
143/4"	291/2"
(375)
	(749)
103/8"
(264)
25"	71/4"
(635)	(184)

Remote BLOWER-150REM

Unit dimensions may vary by ± 1/8" (3).

Dimensions in parentheses are in
millimeters unless otherwise specified.	7