Bakers Pride Oven FKM-FC service manual Item # Description Function

Page 14

Electric Pressure Fryer

Operation

 

 

 

 

 

 

Item #

Description

Function

 

 

 

1

Spin Handle

Used to tighten the lid to the pot once it is latched.

 

 

 

2

Pop Safety Valve lever

Used to release pressure periodically to prevent the seat from

 

 

sticking.

 

 

 

3

Pressure Gauge

Indicates the pressure inside the pot.

 

 

 

4

Computer

Used to program the cooking computer and activate the

 

 

programs.

 

 

 

5

Rocker Switch

FILTER – When placed in this position, power is applied to the

 

 

motor and shorting is pumped into the pot directly or thru the fill

 

 

hose.

 

 

OFF – When placed in this position, power is removed from both

 

 

the pump motor and heating elements.

 

 

FRY – When placed in this position, power is supplied to the

 

 

thermostat and heating elements.

 

 

 

6

Thermostat Knob

Used to set the temperature of the shortening.

 

 

 

7

Thermostat Light

Illuminates red indicating that the heating elements are activated.

 

 

 

8

Digital Timer

The digital timer consists of an LED, display, beeper and 8

 

 

buttons described below:

 

 

 

 

LED indicator

Prior to the start of a timing cycle the LED will be OFF. When

 

 

running a timing cycle the LED will flash. At the end of a timing

 

 

cycle the LED will turn ON steady. When idle the LED is off.

 

 

 

 

TIME SELECT (2

Two arrow buttons on the front panel are used to set the time.

 

arrow buttons)

Hold the UP ARROW button down to increase the time. The

 

 

longer the button is held down, the faster the rate at which the

 

 

time will increase. The DOWN ARROW button is used in the

 

 

same manner as the UP ARROW button except it will cause the

 

 

time to decrease. The time is increased or decreased in 30-

 

 

second increments.

 

 

 

 

START/STOP

Starting the Timer - Pressing this button while the timer is not

 

button

active will cause the timer to begin counting down the time on the

 

 

display.

 

 

Stopping the Timer - Pressing this button while the timer is

 

 

active will stop the timer from counting down and display the

 

 

remaining time. Time cannot be changed with the TIME SELECT

 

 

buttons at this point. If this button is pressed again the timer will

 

 

continue counting down from the point it was stopped.

 

 

Resetting the Timer - Pressing and holding this button for longer

 

 

than two (2) seconds will reset the timer and the display will return

 

 

to the original starting time. At this point, time can be changed

 

 

using the TIME SELECT buttons or the preset buttons.

 

 

Canceling The STIR OIL Function - Pressing this button cancels

 

 

the STIR OIL function while it is active.

 

 

 

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Electric Pressure Fryer Warranty Information Table of Contents Safety Precautions Safety Signs and MessagesFull Disconnection Specific PrecautionsEquipotential ground plane Noncombustible Floors Only Keep The Lid Closed When The Fryer Is Not In UseSafe Work Practices Keep The Area Around Your Fryer UnclutteredAlways Tighten The Spin Handle When Closing The Fryer Always Make Sure The Lid Hook Is Latched When Closing FryerSeal The Safety Valve Properly Do Not Overfill The Fryer With ShorteningProtect Children Wear Safe Clothing Appropriate To Your JobKeep this manual with the Equipment Know your responsibilities as an Employer Keep Safety Labels Clean and in Good ConditionBe Prepared for Emergencies Safety Labels Electric Pressure Fryer Introduction Installation Controls and Indicators OperationCanceling The Stir OIL Function Pressing this button cancels Item # Description FunctionElectric Pressure Fryer Operation Start-Up FKM and FKM-F Care of the ShorteningFKM and FKM-F Operation KEY Display Mode Description Cooking FKM and FKM-F FKM-FC Operation System ProgrammingStep Action Display Comments Product Programming Product Programming SequenceProgram Product # Step Action Display Comments ALF and BLF AutomaticStart-Up FKM-FC Cooking FKM-FCElectric Pressure Fryer Operation Maintenance Description Assembly # AssembliesItem # QTY Description Door Assembly Door Assembly Parts Drain/Motor/Piping Assembly Item # QTY Description Drain Valve & Plugs Drain Valve & Plugs Parts DECAL, CTL PNL FKM Fkmf Front Panel FKM-FC Front Panel FKM-FC Domestic Parts Lid/Top sheet 1 Lid/Top Sheet 2 Lid/Top Sheet 3 Lid/Top Sheet 4 LID/TOP Oil Vat Assembly Filter Screen ASSY,FKM THERMOSTAT, HI Limit 540 DEG Rear Panel FKM-FC Rear Panel FKM-FC Parts Solenoid Valve Assembly Solenoid Valve Assembly Parts Accessories Description Accessory #Components Description Component #Electric Pressure Fryer Replacement Parts Wiring Diagrams FKM-F 220V/380V, 230V/400V, 240V/415V FKM-FC 208V/220V/240V Sheet 1 FKM-FC 208V/220V/240V Sheet 2 FKM-FC 208V/220V/240V Sheet 3 FKM-FC 208V/220V/240V Sheet 4 FKM-FC 220V/380V, 230V/400V, 240V/415V Sheet 1 FKM-FC 220V/380V, 230V/400V, 240V/415V Sheet 2 FKM-FC 220V/380V, 230V/400V, 240V/415V Sheet 3 FKM-FC 220V/380V, 230V/400V, 240V/415V Sheet 4 Electric Pressure Fryer Electric Pressure Fryer LI0192/0808

FKM, FKM-F, FKM-FC specifications

Bakers Pride is a name synonymous with high-quality commercial baking equipment, and their Oven models FKM-FC, FKM-F, and FKM are no exception. Designed for professionals in the culinary industry, these ovens set the standard for performance, reliability, and efficiency.

The FKM series features a robust build suitable for bustling kitchens. They are constructed from high-quality stainless steel, ensuring durability and resistance to wear and tear. The interior is designed for optimal heat retention, which is critical for achieving high-quality baking results consistently.

One of the standout characteristics of these ovens is their user-friendly operation. Each model is equipped with independent heating controls for both top and bottom heat, allowing chefs to customize cooking temperatures for different dishes. This feature is particularly beneficial when preparing multiple items that require varying levels of heat.

The FKM series incorporates advanced heating technology. The ovens utilize a combination of ceramic infrared burners and enhanced convection airflow, which results in even heat distribution throughout the cooking chamber. This technology not only speeds up cooking times but also ensures that baked goods are cooked uniformly, reducing the risk of hot spots.

Another important feature is the high-performance steam injection system available in the FKM-FC model. This system allows bakers to introduce steam during the baking process, which is essential for achieving that perfect crust on artisan breads and pastries. The steam function can be adjusted easily, providing flexibility for different baking needs.

Space efficiency is another noteworthy aspect of the FKM series. These ovens are designed to fit into limited kitchen spaces without compromising on capacity. The FKM-F and FKM-FC models offer multiple baking racks, making them suitable for high-volume operations while still being compact enough for smaller kitchens.

Cleaning and maintenance have also been prioritized in the design of the Bakers Pride FKM ovens. The smooth, stainless steel surface is easy to wipe down, while the removable components allow for thorough cleaning, ensuring that hygiene standards are met.

In summary, the Bakers Pride Oven FKM-FC, FKM-F, and FKM exemplify a perfect balance of advanced technology, user-friendly features, and robust construction. Whether for a busy bakery, restaurant, or catering service, these ovens stand out as powerful tools that enhance baking capabilities and ensure consistent, high-quality results.
Top Page Image Contents