Xpelair 340 manual Wiring Instructions, ∙ Warning this Appliance Must be Earthed

Page 3

Wiring Instructions

This appliance is intended for connection to fixed wiring

Check that the electrical rating shown on the fan matches the mains supply.

WARNING: THIS APPLIANCE MUST BE EARTHED

All installations must be supervised by a qualified electrician.

Installations and wiring must conform to current IEE Regulations (UK), local or appropriate regulations (other countries).

A means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules

1.Switch off the mains electrical supply and remove all fuses before commencing wiring.

2.Wire the fan as shown below

3.Connect the cable from the isolating switch to the electrical supply wiring.

4.Refit fuse before turning on the electricity supply

Image 3
Contents Xvent multipoint ventilation units Xvent 340 range MaintenanceCE-conformity InstallationRemoving the motor and impeller assembly Electrical∙ Warning this Appliance Must be Earthed Wiring InstructionsOperation Remote control RF Radio Frequency 868,3MHzPlease ask for details Customers outside UK see international below